R-JTag does not boot to Dash

Gunna1 · Mar 17, 2014

HI all

The console would start the Freeboot but within 10-20 second get RRoD (Nothing wrong with the console), I kept restarting either by Main button Or Eject and it will RRoD straight away, eventually it did boot to Xell but now just keeps glitching? can anyone tell me what's going on within this Post log - pressed esc to escape the cycle.

I really would appreciate your help here....

Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Version: 10
Press Escape to exit
Waiting for POST to change
Post 20 - CB entry point reached
Post 32 - VERIFY_HEADER_4BL_CD
Post 3C
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post A4 - Panic - VERIFY_SECOTP_10
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post A4 - Panic - VERIFY_SECOTP_10
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 32 - VERIFY_HEADER_4BL_CD
Post 33 - FETCH_CONTENTS_4BL_CD
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 36 - RC4_DECRYPT_4BL_CD
Post 37 - SHA_COMPUTE_4BL_CD
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post B2 - Panic - VERIFY_HEADER
Post B3 - Panic - SHA_VERIFY
Post B4 - Panic - LZX_EXPAND
Post B5 - Panic - VERIFY_OFFSET_6BL
Post B6 - Panic - DECODE_FUSES
Post 20 - CB entry point reached
Post 21 - INIT_SECOTP
Post 28 - FETCH_CONTENTS_3BL_CC
Done!

darkweezil · Mar 17, 2014

Its either getting to much static interference or the Gpu needs a reball.
Lets see pics of your soldering and wire routing.

skillet34 · Mar 17, 2014

Can you fill this out please with pics.

jeeboy · Mar 17, 2014

Tried to write stock nand? Does it boot and work fine with stock nand?

Gunna1 · Mar 17, 2014

No i've not tried that writing the stock nand back yet, (Give it a go tomorrow)

I was trying to hold back on photos, Not been lazy!!! the only reason being it is all in place and taped down!!! But I will post them tomorrow....

Gunna1 · Mar 18, 2014

TX Product(s) used: J-R Programmer
Console Type: Falcon
Rater log:View attachment My Post output.txt

Image of R-Jtag & Images of close-up soldering to motherboard:

The console ROL now goes straight too and stays on the Centre Green led

Green LED on RJTag board lights up every 4seconds or so

Rater also says Cycles to Glitch 0

Do you think this could be just a faulty R-JTag Board? 99.9% sure its not soldering...

Do I try to put the original Nand back to the console if there's a chance the rjtag is faulty?

Martin C · Mar 18, 2014

Hi - desolder the D wire from the R-JTAG board, write the stock NAND back to the console and try to boot it. Leave everything else as-is. You can monitor POST when you do this and report back your findings.

Gunna1 · Mar 18, 2014

Hi Martin C.... I done what you said connected the console up and the Dashboard came straight up, Done a monitor POST Results below

Checking Files
Finished Checking Files
Version: 10
Press Escape to exit
Waiting for POST to change
Post 21 - INIT_SECOTP
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 90 - Panic - VMX_ASSIST
Post 91 - Panic - THERMAL_MANAGEMENT
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post 94 - Panic - VERIFY_OFFSET
Post 95 - Panic - VERIFY_HEADER
Post B4 - Panic - LZX_EXPAND
Post D1 - READ_FUSES
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F1 - Panic - VERIFY_HEADER_CB_B
Post D4 - VERIFY_HEADER_CB_B
Post F5
Post 43 - VERIFY_HEADER
Post 62 - INIT_PROCESS_OBJECTS
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post C2 - LZX_EXPAND_2
Post C3 - LZX_EXPAND_3
Post E2
Done!

Antalpromille · Mar 18, 2014

Gunna1 said:
Hi Martin C.... I done what you said connected the console up and the Dashboard came straight up, Done a monitor POST Results below

Checking Files
Finished Checking Files
Version: 10
Press Escape to exit
Waiting for POST to change
Post 21 - INIT_SECOTP
Post 10 - Payload/1BL started
Post 11 - FSB_CONFIG_PHY_CONTROL
Post 30 - VERIFY_OFFSET_4BL_CD
Post 31 - FETCH_HEADER_4BL_CD
Post 14 - FSB_CONFIG_TX_CREDITS
Post 15 - FETCH_OFFSET
Post 34 - HMACSHA_COMPUTE_4BL_CD
Post 35 - RC4_INITIALIZE_4BL_CD
Post 90 - Panic - VMX_ASSIST
Post 91 - Panic - THERMAL_MANAGEMENT
Post B0 - Panic - VERIFY_CONSOLE_TYPE
Post B1 - Panic - VERIFY_OFFSET
Post 94 - Panic - VERIFY_OFFSET
Post 95 - Panic - VERIFY_HEADER
Post B4 - Panic - LZX_EXPAND
Post D1 - READ_FUSES
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F1 - Panic - VERIFY_HEADER_CB_B
Post D4 - VERIFY_HEADER_CB_B
Post F5
Post 43 - VERIFY_HEADER
Post 62 - INIT_PROCESS_OBJECTS
Post 46 - RC4_INITIALIZE
Post 47 - RC4_DECRYPT
Post 66 - INIT_OBJECT_SYSTEM
Post 67 - INIT_PHASE1_THREAD
Post C2 - LZX_EXPAND_2
Post C3 - LZX_EXPAND_3
Post E2
Done!

that postout look totaly wrong.

Gunna1 · Mar 18, 2014

Ooops forgotten to re-connect the D Wire if that Can make any difference ..... Doing it now and put that post on here...

Antalpromille · Mar 18, 2014

Gunna1 said:
Ooops forgotten to re-connect the D Wire if that Can make any difference ..... Doing it now and put that post on here...

the D wire wont make any difference on your post log, the problem is with your post wiring.

make sure everything is connected like in this thread:
http://team-xecuter.com/forums/showthread.php?t=136258

Gunna1 · Mar 18, 2014

Thanks Antalpromille ..... wonder what's gone wrong there!

Antalpromille · Mar 18, 2014

Gunna1 said:
Thanks Antalpromille ..... wonder what's gone wrong there!

no problem, check your wires and log the post after you fixed any problems found

Martin C · Mar 18, 2014

The POST out was absolutely fine before, Gunna1. Have you changed ANYTHING with that configuration of wires? 3 POST points on the R-JTAG look reworked/resoldered.

Gunna1 · Mar 18, 2014

No nothing at all.... Only thing I did do was reattach a wire on the RJTag board when it came off but straight back to the same point and that was after the console wouldn't start....

what at I'm going to do next is remove tape were necessary and trace them back from the RJtag board to mobo solder points, I did have to solder 2 wires on the rjtag board 99% sure I placed them back were they came from but checking wire along the way..... Maybe 1 got rubbed and shorting now? Cover all possibilities

Martin C · Mar 18, 2014

Which wire in particular?

POST_OUT4 is the problem:

https://www.dropbox.com/s/j8660g4zdxq2tmr/Gunna1_bad_POST.jpg

Is this the wire which came loose? If not, it's been damaged.

Gunna1 · Mar 18, 2014

Hi all been through all the cables and this Post looks good to me How about You?

18 March 2014 15:33:34
J-Runner v0.3 Beta (4) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Version: 10
Press Escape to exit
Waiting for POST to change
Post 04
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1E - BRANCH
Post 04
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1E - BRANCH
Post 04
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1E - BRANCH
Post 04
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1E - BRANCH
Post 04
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1E - BRANCH

i should mention that I haven't loaded Xell yet....

Martin C · Mar 18, 2014

Is this what it's doing with the stock NAND? If so, it's still totally wrong.

https://www.dropbox.com/s/w0xcbaiv1intzp7/Gunna1_bad_POST_2.jpg

bit0 (POST_OUT7) isn't there any more, so you're going backwards.

Gunna1 · Mar 18, 2014

Hi Martin

Yeah this is from the stock nand, that's were the log just stopped

ill run it again and see what happens...

Gunna1 · Mar 18, 2014

===================================================
18 March 2014 16:33:37
J-Runner v0.3 Beta (4) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Version: 10
Press Escape to exit
Waiting for POST to change
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 01
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 1C - SHA_COMPUTE
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 1F
Post 1E - BRANCH
Post 10 - Payload/1BL started
Post 12 - FSB_CONFIG_RX_STATE
Post 14 - FSB_CONFIG_TX_CREDITS
Post 16 - FETCH_HEADER
Post 18 - FETCH_CONTENTS
Post 19 - HMACSHA_COMPUTE
Post 18 - FETCH_CONTENTS
Post 1A - RC4_INITIALIZE
Post 1B - RC4_DECRYPT
Post 1A - RC4_INITIALIZE
Post 1C - SHA_COMPUTE
Post 1D - SIG_VERIFY
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01
Post 01

I had to turn the console on, Before I did it was loading Post01 then as you can see and it then started the post 01 again

Search

Search

R-JTag does not boot to Dash

Gunna1

Full Member

darkweezil

Full Member

skillet34

jeeboy

Gunna1

Full Member

Gunna1

Full Member

Martin C

Gunna1

Full Member

Antalpromille

Gunna1

Full Member

Antalpromille

Gunna1

Full Member

Antalpromille

Martin C

Gunna1

Full Member

Martin C

Gunna1

Full Member

Martin C

Gunna1

Full Member

Gunna1

Full Member