JTAG R-Jtag Falcon FAN

Status
Not open for further replies.
Dark_Riku

Dark_Riku

VIP Member
Mar 2, 2012
356
0
Okay...you're throwing waaaaaay too much into this console at a time. Do as Martin said, disconnect the hardware, and do it one at a time.

Star with soldering in your JRPV2, make sure you can r/w your NAND. Take pictures when they are soldered and post them to us...

After that, re-solder the R-JTAG chip and wires and then take clear pictures. We'll be able to see what you're doing wrong that way.

If you cannot follow simple a simple guide though, this modification to the console is not for you and should be left to a Professional.
 
M

mat989

VIP Member
Mar 15, 2012
166
0
It is working as I said. The rater is working also... here is an example

Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post F7 
Post F7 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 06 
Post 80 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 31 - FETCH_HEADER_4BL_CD 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 5A - INIT_XEX_TRAINING 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 47 - RC4_DECRYPT 
Post 4B - LZX_EXPAND 
Post 4D - DECODE_FUSES 
Post 51 - LOAD_UPDATE_2 
Post 52 - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5E - INIT_SOC_INT_COMPLETE 
Post 5F 
Post 61 - INIT_HAL_PHASE_0 
Post 69 - INIT_KEY_VAULT 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6F - INIT_POWER_MODE 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Most Fails(cumulative): 0xA0
Shutdown
What numbers shall I monitor closely in order to tweak the boot process?
 
A

AllyNerd

VIP Member
Feb 25, 2013
1,179
0
Philadelphia
Honestly man u really need to read the installation guide. Everything is in there. You have 6 dips and 3 voltage settings and 2 resistors thats 36 combos to try.
 
Last edited:
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
OP - I suggest you STOP and read the installation guide.

You've spent the last few pages harping on about support for a product, yet you've clearly failed to read the main installation and tuning guide.

No further help will be given until you proven you've done this.
 
M

mat989

VIP Member
Mar 15, 2012
166
0
No worries...It was not about tuning, it was about the missing readings...turned out to be due to inserting the ribbon cable in the wrong way. But at least now I know that non R-JTAG (corrected) system leads to non functioning fans.
 
M

mat989

VIP Member
Mar 15, 2012
166
0
I am testing the Rater....It boots the machine, but does not power it down! I thought between cycles the system must be shutdown and left for sometime to cooldown...this does not happen! Again, if you just joined, xell boots...but not that stable...I am trying to tweak the boot process using an official team-xecuter product...

thnx

*edit*
Please note that the dvd drive and the hdd are both attached as recommended by the guide...

*edit*
Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 1E - BRANCH 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 10 - Payload/1BL started 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 06 
Post E0 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 87 - Panic - ALIGNMENT 
Post 80 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 14 - FSB_CONFIG_TX_CREDITS 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 87 - Panic - ALIGNMENT 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 13 - FSB_CONFIG_TX_STATE 
Post 15 - FETCH_OFFSET 
Post 16 - FETCH_HEADER 
Post 17 - VERIFY_HEADER 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 31 - FETCH_HEADER_4BL_CD 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 39 - SHA_VERIFY_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 47 - RC4_DECRYPT 
Post 4B - LZX_EXPAND 
Post 4D - DECODE_FUSES 
Post 51 - LOAD_UPDATE_2 
Post 52 - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5F 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 64 - INIT_MEMORY_MANAGER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6F - INIT_POWER_MODE 
Post 70 - INIT_VIDEO_DRIVER 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 75 - INIT_DUMP_SYSTEM 
Post 76 - INIT_SYSTEM_ROOT 
Post 77 - INIT_OTHER_DRIVERS 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Most Fails(cumulative): 0xA0
Shutdown
The system was supposed to shutdown?! but it did not, the cooling timer started...what is next?
 
Last edited:
M

mat989

VIP Member
Mar 15, 2012
166
0
They were! sorry...will do it later...btw, it seems I have only 1 ribbon...and since I am doing a slim install I am using it at the moment. Because due to my lack of knowledge I though it must be permanently installed in the system....
 
M

mat989

VIP Member
Mar 15, 2012
166
0
Sometimes it does boot if HDMI is not connected...However, now I get 0010 error code...i.e. southbridge issues. What shall I do? Take a picture of the area and post it here, or get more readings from the rater for you guys to study?!
 
M

mat989

VIP Member
Mar 15, 2012
166
0
I get RROD most of the time...sometimes it does boot as indicated by the green LEDs around the center LED, but when I connect the HDMI cable...I dont get picture. Southbridge seems clean, but I am not sure what might cause the issue...however, this RROD is not instant, it happens after many failed attempts to glitch/boot... I will test it one more time and report back...

thnx
 
M

mat989

VIP Member
Mar 15, 2012
166
0
Check this out
Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 04 
Post 04 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 31 - FETCH_HEADER_4BL_CD 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 5A - INIT_XEX_TRAINING 
Post 60 - INIT_KERNEL 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4D - DECODE_FUSES 
Post 51 - LOAD_UPDATE_2 
Post 52 - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5F 
Post 60 - INIT_KERNEL 
Post 64 - INIT_MEMORY_MANAGER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 6F - INIT_POWER_MODE 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Most Fails(cumulative): 0xA0
Shutdown
but the system did not power off?! The cooling timer started...Am I missing something here?!

thnx

*edit*
And yes, the nand cables are attached to the JR-P V2...
 
M

mat989

VIP Member
Mar 15, 2012
166
0
Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 79 - LOAD_XAM 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 70 - INIT_VIDEO_DRIVER 
Post 60 - INIT_KERNEL 
Post F0 - Panic - VERIFY_OFFSET_CB_B 
Post 20 - CB entry point reached 
Post 70 - INIT_VIDEO_DRIVER 
Post 60 - INIT_KERNEL 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 60 - INIT_KERNEL 
Post 60 - INIT_KERNEL 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 60 - INIT_KERNEL 
Post E0 
Post 10 - Payload/1BL started 
Post 18 - FETCH_CONTENTS 
Post 1A - RC4_INITIALIZE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post E0 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 18 - FETCH_CONTENTS 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 60 - INIT_KERNEL 
Post 60 - INIT_KERNEL 
Post 70 - INIT_VIDEO_DRIVER 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 70 - INIT_VIDEO_DRIVER 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached
After all these, I get RROD... 0010

*edit*
It keeps "Post A0 - Panic - VERIFY_SECOTP_6 " until RROD
 
Last edited:
M

mat989

VIP Member
Mar 15, 2012
166
0
Another Successful boot after passing Post 21
Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 79 - LOAD_XAM 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 10 - Payload/1BL started 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 70 - INIT_VIDEO_DRIVER 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 60 - INIT_KERNEL 
Post 10 - Payload/1BL started 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 70 - INIT_VIDEO_DRIVER 
Post 60 - INIT_KERNEL 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 70 - INIT_VIDEO_DRIVER 
Post 10 - Payload/1BL started 
Post 18 - FETCH_CONTENTS 
Post 19 - HMACSHA_COMPUTE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post A0 - Panic - VERIFY_SECOTP_6 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 60 - INIT_KERNEL 
Post 70 - INIT_VIDEO_DRIVER 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 12 - FSB_CONFIG_RX_STATE 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 2F - RELOCATE 
Post 2E - HWINIT 
Post 31 - FETCH_HEADER_4BL_CD 
Post 33 - FETCH_CONTENTS_4BL_CD 
Post 34 - HMACSHA_COMPUTE_4BL_CD 
Post 35 - RC4_INITIALIZE_4BL_CD 
Post 36 - RC4_DECRYPT_4BL_CD 
Post 37 - SHA_COMPUTE_4BL_CD 
Post 3A - BRANCH 
Post 40 - Entrypoint of CD reached 
Post 42 - FETCH_HEADER 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 46 - RC4_INITIALIZE 
Post 47 - RC4_DECRYPT 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4E - FETCH_OFFSET_6BL_CF 
Post 4F - VERIFY_OFFSET_6BL_CF 
Post 51 - LOAD_UPDATE_2 
Post 50 - LOAD_UPDATE_1 
Post 52 - BRANCH 
Post 58 - INIT_HYPERVISOR 
Post 5A - INIT_XEX_TRAINING 
Post 61 - INIT_HAL_PHASE_0 
Post 63 - INIT_KERNEL_DEBUGGER 
Post 64 - INIT_MEMORY_MANAGER 
Post 65 - INIT_STACKS 
Post 66 - INIT_OBJECT_SYSTEM 
Post 67 - INIT_PHASE1_THREAD 
Post 68 - Started phase 1 Initialization + INIT_PROCESSORS 
Post 69 - INIT_KEY_VAULT 
Post 6A - INIT_HAL_PHASE_1 
Post 6B - INIT_SFC_DRIVER 
Post 11 - FSB_CONFIG_PHY_CONTROL 
Post 1B - RC4_DECRYPT 
Post 1C - SHA_COMPUTE 
Post 1D - SIG_VERIFY 
Post 1E - BRANCH 
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 22 - INIT_SECENG 
Post 3A - BRANCH 
Post 44 - FETCH_CONTENTS 
Post 45 - HMACSHA_COMPUTE 
Post 48 - SHA_COMPUTE 
Post 4B - LZX_EXPAND 
Post 4D - DECODE_FUSES 
Post 51 - LOAD_UPDATE_2 
Post 52 - BRANCH 
Post 59 - INIT_SOC_MMIO 
Post 5A - INIT_XEX_TRAINING 
Post 5B - INIT_KEYRING 
Post 5C - INIT_KEYS 
Post 5F 
Post 60 - INIT_KERNEL 
Post 64 - INIT_MEMORY_MANAGER 
Post 6C - INIT_SECURITY 
Post 6D - INIT_KEY_EX_VAULT 
Post 70 - INIT_VIDEO_DRIVER 
Post 72 - INIT_BOOT_ANIMATION + XMADecoder & XAudioRender Init 
Post 73 - INIT_SATA_DRIVER 
Post 78 - INIT_STFS_DRIVER 
Post 79 - LOAD_XAM 
Most Fails(cumulative): 0xA0
Shutdown
Basically If it passes post 21 (corrected), it does boot and reaches post 79... How can I improve the process and resolve that post (corrected) 21 issue?!

*edit*
Why the system does not power off when instructed by the Jrunner as shown by Shutdown at the end?!

*edit*
Excuse me, I meant passing post 21 successfully...

*edit*
Any recommendations for the length and location of some of the cables?! Like the CPU_RST for instance?! I am using the R8C2 alt CPU_RST
 
Last edited:
DreamZ

DreamZ

VIP Member
Dec 8, 2009
1,240
0
Essex UK
www.ixtreme.talktalk.net
You dont actually understand enough about how this works.

Instead its just one problem after the next. You even have a cr3pro thread active.

My advice is giveup and let someone do this for you. Im confused reading through all this bs
 
M

mat989

VIP Member
Mar 15, 2012
166
0
Understand what? I am not the developer of this modchip. Basically, I can solder, follow the instructions...and then wait for the results of my work. The issue is that when everything seems OK yet the system does not work as expected...what can I do?! If it was a DIY modchip I would ask in the proper place...As you can see here, I did everything I could, I even supplied enough pictures, but yet the xbox does not work as expected. Show me where I failed and I will fix it.

Thnx
 
A

AllyNerd

VIP Member
Feb 25, 2013
1,179
0
Philadelphia
so since u have cpu_rst on alt point did you try it on the recommended point? Did you try each of the voltage settings also which trying each of the dips? as i said its 36 combos(72 if you want to include the resistor jumper) that you need to be trying until you get optimal settings. its all in the manual bud just take your time and do one step at a time.
 
  • Like
Reactions: mat989
M

mat989

VIP Member
Mar 15, 2012
166
0
It is not about optimizing, OK...first you start from scratch...get things going...then you start optimizing! If it fails, then surely something is bad...I replaced the stock wires with Kynar 30 AWG wires...I even fixed the stock nand wires to make sure that no shorts exist... Now it is like this

Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 20 - CB entry point reached 
Post 21 - INIT_SECOTP 
Post 31 - FETCH_HEADER_4BL_CD 
Post 21 - INIT_SECOTP 
Post 31 - FETCH_HEADER_4BL_CD 
Post 01 
Post 31 - FETCH_HEADER_4BL_CD 
Post 01 
Post 31 - FETCH_HEADER_4BL_CD 
Post 21 - INIT_SECOTP 
Post 31 - FETCH_HEADER_4BL_CD 
Post 01 
Post 31 - FETCH_HEADER_4BL_CD 
Post 21 - INIT_SECOTP 
Post 31 - FETCH_HEADER_4BL_CD 
Post 21 - INIT_SECOTP 
Post 31 - FETCH_HEADER_4BL_CD 
Post 21 - INIT_SECOTP 
Post 01 
Post 21 - INIT_SECOTP 
Post 31 - FETCH_HEADER_4BL_CD 
Post 21 - INIT_SECOTP
And NO green LED! I will test more...If you have something to say...please do so...
 
M

mat989

VIP Member
Mar 15, 2012
166
0
Code: 
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 60 - INIT_KERNEL 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 40 - Entrypoint of CD reached 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 30 - VERIFY_OFFSET_4BL_CD 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 40 - Entrypoint of CD reached 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 40 - Entrypoint of CD reached 
Post 20 - CB entry point reached 
Post 20 - CB entry point reached 
Post 40 - Entrypoint of CD reached
No Green LED, inspected the points and installation with multimeter...southbridge issue (error code 0010)
 
Status
Not open for further replies.