Team-Xecuter Community
Console Type: (Zephyr/Falcon/Opus/Jasper)
NAND size: 16/256/512
Dashboard version: 2.0.16203
CB version: 5774
Screenshot of NAND details from J-Runner:
PS: It says writting nad because i tred to see if it was maybe my xell image so i wrote back the OG nand and tryed to make a new Xell image that didnt work though.
J-Runner log:
POST output from J-Runner: didnt think this was needed since there is not even a green light. I can get one though if needed.
updflash.bin log (if applicable): Dont have one not sure how to get one either
Image of R-JTAG board:
I think the soldering is fine a little dirty because i couldnt clean up all the flux in the tight spaces but everyt hing is good other than the little bit of solder i got on that metal plate thing.
Images of close-up soldering to motherboard:
so i have been looking and i think that 2nd to last post point on the right may be the problem it looks like i messed up the pad a little bit.
Description of problem:
So i did a Kynar wire install with this new R-JTAG and i installed everything like normal everything seemed to be working fine and going right and after i created the Xell Image and wrote it i unplugged my JR-Programmer like normal and plugged in the console to get my CPUKey and as i turned on the console nothing happened the light just blinked and there was a red LED and thats it no green flashes what so ever, this is not my first install so i thought this was very weird so i tried both CPU_RST points and neither worked i also tryed writting back the OG nand and it worked fine so i tried creating another xell image to see if that was the problem and no change i really need help because i would love to buy many more R-JTAGs for my other consoles (i buy RROD consoles and fix them so i have like 12 consoles) also i have 2 R-JTAG boards and i try'd the other and that one did not work either so please help me
.
Was the console working before you started: Y/N
UPDATE: With CPU_RST and RATER
WHENi hit post 80 i got 3 RROD
NAND size: 16/256/512
Dashboard version: 2.0.16203
CB version: 5774
Screenshot of NAND details from J-Runner:
PS: It says writting nad because i tred to see if it was maybe my xell image so i wrote back the OG nand and tryed to make a new Xell image that didnt work though.
J-Runner log:
POST output from J-Runner: didnt think this was needed since there is not even a green light. I can get one though if needed.
updflash.bin log (if applicable): Dont have one not sure how to get one either
Image of R-JTAG board:
I think the soldering is fine a little dirty because i couldnt clean up all the flux in the tight spaces but everyt hing is good other than the little bit of solder i got on that metal plate thing.
Images of close-up soldering to motherboard:
so i have been looking and i think that 2nd to last post point on the right may be the problem it looks like i messed up the pad a little bit.
Description of problem:
So i did a Kynar wire install with this new R-JTAG and i installed everything like normal everything seemed to be working fine and going right and after i created the Xell Image and wrote it i unplugged my JR-Programmer like normal and plugged in the console to get my CPUKey and as i turned on the console nothing happened the light just blinked and there was a red LED and thats it no green flashes what so ever, this is not my first install so i thought this was very weird so i tried both CPU_RST points and neither worked i also tryed writting back the OG nand and it worked fine so i tried creating another xell image to see if that was the problem and no change i really need help because i would love to buy many more R-JTAGs for my other consoles (i buy RROD consoles and fix them so i have like 12 consoles) also i have 2 R-JTAG boards and i try'd the other and that one did not work either so please help me
.Was the console working before you started: Y/N
UPDATE: With CPU_RST and RATER
WHENi hit post 80 i got 3 RROD