R-Jtag power but green power led doesn't comes

N

nicktika

Junior Member
Mar 1, 2014
10
0
Hello, Please help me just received a R-jtag ultimate kit, I installed it and read Nand, create ECC and Write ECC that part went well. Now when i power up the xbox Jasper 512 console it turns on but, the power green led doesn't comes on

that's where i stuck..
Anyone Please help
 
N

nicktika

Junior Member
Mar 1, 2014
10
0
Jasper 512
dash ver: 2.0.16547.0
Screenshot of NAND details from J-Runner: http://s24.postimg.org/m64f7pk0l/screen_shot.png
J-Runner log:
Code: 
===================================================
Tuesday, April 08, 2014 11:47:18 PM

J-Runner v0.3 Beta (1) Started



Version v0.3 Beta (4) is available for download.
Checking Files
Downloaded *xeBuild/readme.txt
Downloaded *xeBuild/launch.xex
Downloaded *xeBuild/lhelper.xex
Downloaded *xeBuild/xeBuild.exe
Downloaded *xeBuild/updserv.rar
Finished Checking Files
Downloading...

===================================================
Tuesday, April 08, 2014 11:48:10 PM

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files
Jasper 512MB Manually Selected
Version: 10
Flash Config: 0x00AA3020
00AA3020
Jasper 512MB
CB Version: 6754
Jasper 512MB Manually Selected
Reading Nand to C:\Users\Leecher\Desktop\J-Runner\output\nanddump1.bin
Reading Nand
Done!
in 14:05 min:sec

Reading Nand to C:\Users\Leecher\Desktop\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Jasper 512MB
Reading Nand
Jtag Selected
Nand Initialization Finished
Done!
in 14:03 min:sec

Comparing...Takes a while on big nands
Nands are the same
Aud_Clamp Selected
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
Version: 10
Flash Config: 0x00AA3020
Writing Nand
jasper_hack_bigblock_aud_clamp.bin
Done!
in 0:18 min:sec

Tip: Load the nand on source to have quicker results.
Scanning.....
No Xbox Detected
Finished
System.ComponentModel.Win32Exception (0x80004005): Error creating window handle.
   at System.Windows.Forms.NativeWindow.CreateHandle(CreateParams cp)
   at System.Windows.Forms.Control.CreateHandle()
   at System.Windows.Forms.TextBoxBase.CreateHandle()
   at System.Windows.Forms.Control.get_Handle()
   at System.Windows.Forms.Control.get_WindowText()
   at System.Windows.Forms.TextBoxBase.get_WindowText()
   at System.Windows.Forms.Control.get_Text()
   at System.Windows.Forms.TextBoxBase.set_Text(String value)
   at System.Windows.Forms.TextBox.set_Text(String value)
   at JRunner.POST.SleepIntermittently(Int32 totalTime)
   at JRunner.POST.rate_post()
System.ComponentModel.Win32Exception (0x80004005): Error creating window handle.
   at System.Windows.Forms.NativeWindow.CreateHandle(CreateParams cp)
   at System.Windows.Forms.Control.CreateHandle()
   at System.Windows.Forms.TextBoxBase.CreateHandle()
   at System.Windows.Forms.Control.get_Handle()
   at System.Windows.Forms.Control.get_WindowText()
   at System.Windows.Forms.TextBoxBase.get_WindowText()
   at System.Windows.Forms.Control.get_Text()
   at System.Windows.Forms.TextBoxBase.set_Text(String value)
   at System.Windows.Forms.TextBox.set_Text(String value)
   at JRunner.POST.SleepIntermittently(Int32 totalTime)
   at JRunner.POST.rate_post()

===================================================
Wednesday, April 09, 2014 5:04:01 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files

===================================================
Wednesday, April 09, 2014 5:09:04 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files

===================================================
Wednesday, April 09, 2014 8:04:20 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Bootloader Removed.

===================================================
Wednesday, April 09, 2014 8:22:08 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected

===================================================
Wednesday, April 09, 2014 8:25:06 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files

===================================================
Wednesday, April 09, 2014 8:25:18 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Jtag Selected
Finished Checking Files
Aud_Clamp Selected
R-Jtag Selected

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5

===================================================
Wednesday, April 09, 2014 8:27:19 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Jasper 512MB Manually Selected

===================================================
Wednesday, April 09, 2014 8:32:24 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
R-Jtag Selected

Bootloader Attached
Bootloader Version: 1.0.5

===================================================
Wednesday, April 09, 2014 10:02:01 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
R-Jtag Selected
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5

===================================================
Wednesday, April 09, 2014 10:03:17 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files

Bootloader Attached
Bootloader Version: 1.0.5
Jtag Selected
R-Jtag Selected
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5

===================================================
Wednesday, April 09, 2014 10:29:30 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected

===================================================
Wednesday, April 09, 2014 10:30:44 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
R-Jtag Selected

Bootloader Attached
Bootloader Version: 1.0.5
Aud_Clamp Selected
Aud_Clamp de-Selected
Aud_Clamp Selected

===================================================
Wednesday, April 09, 2014 5:10:12 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected

===================================================
Wednesday, April 09, 2014 5:20:15 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Aud_Clamp de-Selected
R-Jtag de-Selected

===================================================
Wednesday, April 09, 2014 5:24:59 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Initializing nanddump1.bin..
Jasper BB
Nand Initialization Finished
Initializing nanddump1.bin..
Jasper BB
Nand Initialization Finished
Comparing...Takes a while on big nands
Nands are the same
Jasper 512MB Manually Selected
Comparing...Takes a while on big nands
Nands are the same
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
Device Not Found.
Device Not Found.

===================================================
Wednesday, April 09, 2014 5:41:25 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Tip: Load the nand on source to have quicker results.
Scanning....
No Xbox Detected
Finished

===================================================
Wednesday, April 09, 2014 5:56:41 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5

===================================================
Wednesday, April 09, 2014 5:58:23 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files

===================================================
Wednesday, April 09, 2014 6:29:27 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Initializing nanddump1.bin..
Jasper BB
Nand Initialization Finished
Comparing...Takes a while on big nands
Nands are the same
Jasper 512MB Manually Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
Version: 10
Flash Config: 0x00000000
Can not Continue
Jasper 256MB Manually Selected
Jasper 16MB Manually Selected
Jasper 512MB Manually Selected

===================================================
Wednesday, April 09, 2014 6:46:52 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files

===================================================
Wednesday, April 09, 2014 6:47:43 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Jasper 512MB Manually Selected

===================================================
Wednesday, April 09, 2014 6:50:21 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files

===================================================
Wednesday, April 09, 2014 7:13:07 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5

===================================================
Thursday, April 10, 2014 8:42:34 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected

===================================================
Thursday, April 10, 2014 8:44:58 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Jtag Selected

Checking Files
Finished Checking Files
Retail Selected
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Jtag Selected
Aud_Clamp Selected
R-Jtag Selected
Jasper 512MB Manually Selected

===================================================
Thursday, April 10, 2014 10:53:34 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Jasper BB
Jtag Selected
Nand Initialization Finished
Comparing...Takes a while on big nands
Nands are the same
Aud_Clamp Selected
R-Jtag Selected
Jasper 512MB Manually Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully jasper_hack_bigblock_aud_clamp.bin
Version: 10
Flash Config: 0x00AA3020
Writing Nand
jasper_hack_bigblock_aud_clamp.bin
Done!
in 0:18 min:sec


===================================================
Thursday, April 10, 2014 11:28:01 AM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Jtag Selected

Checking Files
Finished Checking Files
Jasper 512MB Manually Selected
R-Jtag Selected
Aud_Clamp Selected
R-Jtag de-Selected
Aud_Clamp de-Selected
Retail Selected
Jasper 16MB Manually Selected
Jasper 512MB Manually Selected

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5

===================================================
Thursday, April 10, 2014 6:05:07 PM

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Bootloader Removed.

Bootloader Attached
Bootloader Version: 1.0.5
Bootloader Removed.
Jtag Selected
Jasper 512MB Manually Selected
Aud_Clamp Selected
R-Jtag Selected

[B]POST output from J-Runner[/B] [B]RATER [/B]
Phat Selected
Version: 10
Power Up
Waiting for POST to change
Shutdown
http://s27.postimg.org/6s4o3f3jn/20140410_163447.jpg
http://s15.postimg.org/rzkhw5257/20140410_163623.jpg
http://s10.postimg.org/getxupd55/20140410_163742.jpg
http://s21.postimg.org/rsg2aagsn/20140410_164702.jpg
http://s17.postimg.org/y2woxpgsv/20140410_164930.jpg

Hello, Please help me just received a R-jtag ultimate kit, I installed it and read Nand, create ECC and Write ECC that part went well. Now when i power up the xbox Jasper 512 console it turns on but, the power green led doesn't comes on... Console was working

that's where i stuck..
Anyone Please help
 
Last edited by a moderator:
N

nicktika

Junior Member
Mar 1, 2014
10
0
this is what i'm getting


Phat Selected
Version: 10
Power Up
Waiting for POST to change


or

when change the dips

Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 20 - CB entry point reached
Post 30 - VERIFY_OFFSET_4BL_CD
Post 70 - INIT_VIDEO_DRIVER
Post F0 - Panic - VERIFY_OFFSET_CB_B
Post F8
Post FC
Post FD
Post EF
Post CF
Post 4F - VERIFY_OFFSET_6BL_CF
Post 0F
Post 07
Post 06
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
first things first, turn on jumpers 7 and 8, then work your way through the dips 1-6. also dont forget to flip the on/off switch to on on the jtag board. if that doesnt work, try switching the blue cpu_rst wire to the top side point. also touch up the post out points, as your post is off(Use lots of flux.) and trim down the excess wire on the aud_clamp wire, as that will probably short out when u put it back in the case.
 
Last edited:
You must log in or register to reply here.