R-Jtag troubles, jasper

[mhzman]

Console Type: Jasper
NAND size: 16
Dashboard version: 2.0.16202
CB version: 6273
Photo: Attached:
J-Runner log: Attached
Image of R-JTAG board: Will post tonight
Images of close-up soldering to motherboard: Will post tonight


Description of problem: Using bottom side CPU_RST point, Rater/POST loops and never passes "Post A0 - VERIFY_SECOTP_6 ", using top CPU_RST I get RROD with a few seconds, every time.

Was the console working before you started: Yes (with Cr3Lite RGH2)


Any thoughts from the r-jtag gods?

 

[keil423]

Your getting close! We need images of the install first off.

We need to know how your Aud Clamp is set up and what dips and voltage jumpers your using on the Rjtag chip.

 

[mhzman]

Your getting close! We need images of the install first off.

We need to know how your Aud Clamp is set up and what dips and voltage jumpers your using on the Rjtag chip.

At least it's positive info! I was up until 5am (this morning) screwing with this thing. I'll get the images posted this afternoon.

Thanks for the response!

-Brian