ANSWERED R-Jtagged xbox not starting up?

[Martin C]

0010 is more than likely soldering in this case. There are at least 2 problems as mentioned which need sorting out.

Do this and then please complete the template fully (new pics of CPU_RST and QSB)

 

[Gunna1]

Hi all again

Description of problem:

I've moved the CPU_RST to the alternative point R8C2 and now have some action But still not reading the nand, I have had the same results using just the R-Jtag option, and the R-Jtag + AUD I have tried all these options with the DVD Drive attached and Unattached, Power cable plugged in to the console (NOT turned on) and unplugged .... NON of these brings any nand reading!

Console Type: Falcon

Dashboard version: e.g 2.0.15574

Console was working before I R-Jtagged

Was the console working before you started

 

[Martin C]

Then read my NAND-x troubleshooting guide. All NAND R/W functions need the PSU connected to the console (but console not turned on).

The guide will show you what points to check for voltage so you can eliminate SPI.

 

[Gunna1]

I've some how got it going.... A lot of Luck Not skill!!! Thanks everyone for your help.

i have a slim that I want doing next BUT I think I'll leave it to the experts, just going to find someone to do it for me!