TX Product(s) used: Slim proto v2, 4g R/W kit, post fit adapter v2, post QSB
Console Type: corona manufacturer date 7/2013
NAND size: 4GB
Dashboard version: 16547
CB version:
Screenshot of NAND details from J-Runner:
H:\
Reading from H:\ to C:\Users\Victorino\Desktop\J-Runner\output\nanddump1.bin
Done!
in 0:03 min:sec
Initializing nanddump1.bin..
Corona 4GB
RGH2 Selected
Nand Initialization Finished
H:\
Reading from H:\ to C:\Users\Victorino\Desktop\J-Runner\output\nanddump2.bin
Done!
in 0:03 min:sec
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
ECC created
Use Edited Options Selected
ECC created
Writing to H:\ from C:\Users\Victorino\Desktop\J-Runner\output\image_00000000.ecc
Done!
in 0:00:279 min:sec:ms
Initializing nanddump1.bin..
Corona 4GB
Nand Initialization Finished
J-Runner log:Kernel : 2.0.16547.0
Console : Corona
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 003581431543
ConsoleId : 570526748419
MoboSerial: 7501277228913125
Mfg Date : 04/07/2013
CPU Key : 7D42CCC1DAAE2BD.........
1BL Key : DD88AD0C9ED669E..........
DVD Key : A5D7A8EE655BB58..........
CF LDV : 2
KV type : type2 (hashed - unchecked, master key not available)
updflash.bin log (if applicable):
Image of Coolrunner:
*followed slim proto v2 tuning guide, dips in picture are just after install corrently best boots with 3,8 on 12cm wire to 47 on post out qsb, stock length on post fit adapter 50
Description of problem: successfully rgh yesterday today started tuning and debug light stopped after 4 cycles, tried r1r1 resister (used ground wire) it fixed debug light, (continued to flash) but did not boot freeboot. Removed ground console will not boot freeboot, but boots stock??
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: yes and no
How long is the light on for each time: 4-5sec
Console Type: corona manufacturer date 7/2013
NAND size: 4GB
Dashboard version: 16547
CB version:
Screenshot of NAND details from J-Runner:
H:\
Reading from H:\ to C:\Users\Victorino\Desktop\J-Runner\output\nanddump1.bin
Done!
in 0:03 min:sec
Initializing nanddump1.bin..
Corona 4GB
RGH2 Selected
Nand Initialization Finished
H:\
Reading from H:\ to C:\Users\Victorino\Desktop\J-Runner\output\nanddump2.bin
Done!
in 0:03 min:sec
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
ECC created
Use Edited Options Selected
ECC created
Writing to H:\ from C:\Users\Victorino\Desktop\J-Runner\output\image_00000000.ecc
Done!
in 0:00:279 min:sec:ms
Initializing nanddump1.bin..
Corona 4GB
Nand Initialization Finished
J-Runner log:Kernel : 2.0.16547.0
Console : Corona
NAND size : 16MiB
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : 003581431543
ConsoleId : 570526748419
MoboSerial: 7501277228913125
Mfg Date : 04/07/2013
CPU Key : 7D42CCC1DAAE2BD.........
1BL Key : DD88AD0C9ED669E..........
DVD Key : A5D7A8EE655BB58..........
CF LDV : 2
KV type : type2 (hashed - unchecked, master key not available)
updflash.bin log (if applicable):
Image of Coolrunner:
*followed slim proto v2 tuning guide, dips in picture are just after install corrently best boots with 3,8 on 12cm wire to 47 on post out qsb, stock length on post fit adapter 50
Description of problem: successfully rgh yesterday today started tuning and debug light stopped after 4 cycles, tried r1r1 resister (used ground wire) it fixed debug light, (continued to flash) but did not boot freeboot. Removed ground console will not boot freeboot, but boots stock??
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: yes and no
How long is the light on for each time: 4-5sec
