re-program the Bios?

ezlife24

Noob Account
Mar 22, 2005
1
0
Is there a way to re-install or reprogram the Bios?
I screw up- and when I flash the bios my switches were not on on off off off and I flash it anyway ( I know I was tire and dum when I did it).

Do I need to purchase another chip or again is there a chance to re-program the Bios?

Thanks for your help
 

adam.giles

VIP Member
Jan 18, 2005
2,000
0
North East England
Yep, boot into your back-up bios, set your switches to the desired bank, and flash away.
 

nartac

VIP Member
Oct 31, 2004
598
0
USA
you have 1.6 and not 1.6b right? If that is the case, set your switches to on on off off off then press power and eject buttons at the same time until your X3 logo on the control panel switch turns purple. This should take you to backup flashbios (version 3.0.1 which should work with 1.6 xbox)
 

kimberklr

Junior Member
Apr 22, 2005
16
0
im in the same situation.
please be sure to post back if you find anything.i will do the same. ;)
 

kimberklr

Junior Member
Apr 22, 2005
16
0
hot swap what?
the x3?that would be nice if i had access to another.
as for ms bios i think its a soldered chip so no removal.
 

timodell7

Full Member
Feb 28, 2005
61
0
If you have 2 xbox's with x3's I read you can boot the one that works to the flash bios and then while its still running swap the x3 chips. then flash it and I guess wahla.
 

timodell7

Full Member
Feb 28, 2005
61
0
If anyone knows more about the hot swap post your info. I was wondering if I could swap a bad x3 from a older xbox into a 2.6 1.6 xbox