*READ FIRST* DemoN Toolbox v1.01 *Download*

Xecuter

Staff member
Top TX Brass
Dec 6, 2002
11,459
128
Asia
team-xecuter.com
Xecuter DemoN Toolbox v1.01 - June 21st 2012



Do not touch your soldering iron yet !

First connect DemoN via a MicroUSB cable to the onboard microUSB port (move switch to "PC"). (The ToolBox tabs will not work unless the DemoN is connected to USB and detected correctly - these are all safety measures)

Then install the toolbox and make sure the "Install USB Driver" is ticked (Toolbox will not run until DemoN has been connected and installed).

You can test full read/write before you install to your Xbox (so you know its working fine and you can blame your soldering if it isn't)

We also recommend you install the ext module with the miniUSB port via the shielded FFC ribbon cable and test nand switching too (the DemoN Toolbox will tell you which nand is selected and the LED will work also).

TIP



You do not need to switch the CoolRunner to PRG for programming with Demon - always leave it set to NOR. You will get errors otherwise. It was designed like this so that you can program both your Demon and CoolRunner through an external USB port without ever opening up your Xbox again!




These tests will help you determine that everything is working perfectly BEFORE you even get your soldering iron out :)

Warning

Remember to move the switch to XB when you install the DemoN to your Xbox. DO NOT have it switched to PC when your Xbox is powered on or even in standby as you may damage your DemoN.

Also when programming 360 NAND/Demon NAND/CoolRunner do NOT have the Xbox powered on - it must be plugged in but NOT powered on



Yes I know the GUI looks similar to the old Cygnos app, I didn't see any point in changing the way the interface layout so decided to keep it looking familiar - of course everything is different 'under the hood'.

DOWNLOAD DEMON TOOLBOX v1.01

Changelog

v1.01
Added Read/Write Times
Auto Scroll CLI Window
Xbox 360 Power Buttons Displayed Better
Fixed Toolbar Icon

Changelog
v1.00 - First Release

Note: If for some reason you have issues running ToolBox in Windows 7 - set it to XP SP3 Compatibility mode.
 

lio_x

VIP Member
Oct 4, 2011
376
0
Re: DemoN Toolbox *Download*

great- waiting for shipment -hope it will be today


Warning


Remember to move the switch to XB when you install the DemoN to your Xbox. DO NOT have it switched to PC when your Xbox is powered on or even in standby or you may damage your Demon.






this one going to be tough
 
Last edited:
  • Like
Reactions: RAFAELACA

rick48235

VIP Member
Sep 14, 2010
620
33
MICH
Re: DemoN Toolbox *Download*

i opens for me but it says missing drivers. so you need demon to run it iam on win 7 64 bit
 

Netkar

VIP Member
Apr 27, 2005
391
33
Re: DemoN Toolbox *Download*

error for me. you can see dll in system32 :(
windows 7 ultimate (parallels on macbook but I never had problems with other tools (like jrunner and jf)
 

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,272
0
California, USA
Why did you post the same question twice ?

Did you not read the forum rules like you are asked to ?

You have to have DemoN connected to your PC when installing the Toolbox for the first time.
 

SilversX

Junior Member
Jan 28, 2011
15
0
Naperville, IL
Re: DemoN Toolbox *Download*

error for me. you can see dll in system32 :(
windows 7 ultimate (parallels on macbook but I never had problems with other tools (like jrunner and jf)

Read OP they said the "Demon has to be connected or the toolbox wont work"!

Thanks Team expecting my Demon any day now!:cool2: