JTAG Reading Nand Problem

[Road-Runner]

im trying to read an xenons jtag nand but it says

"Looking for usb interface device'
Can not continue

What does this mean? I already have the nand x drivers

 

[fanni]

Check your wiring and make sure you have the power supply plugged into the 360 but not turned on

Also ate you sure USB cable to NAND x is ok

 

[AteOeight]

We can help, but if you want help you GOTTA post pictures of your work, read the stickies. We genuinely wanna help, without wasting time. Now if you checked w/multi meter and your work is good, try diff cable and/or nand-x... make your you got the one with v3 code. Lemme know if you tried or not.

 

[xColorado880]

This always comes down to either soldering or you didn't install the drivers right

 

[AteOeight]

Do you see this in your device manager?

 

[WestCoastConsoles]

Simple question is the box plugged in but not on?

 

[OilyD]

This always comes down to either soldering or you didn't install the drivers right

No it doesn't,it could be the odd chance his Nand X is faulty like mine was

 

[Road-Runner]

Check your wiring and make sure you have the power supply plugged into the 360 but not turned on

Also ate you sure USB cable to NAND x is ok

OMG i forgot about pluging the power cord into the xbox 360 lol... i already took the nandx wires out im soo f**king stupid

 

[fanni]

Thought that would be it such a common problem