JTAG Reading the Nand Error: 208 Reading Block 3FF

[Kr4k 4 J4Ck]

Alright so soldered my wires in (direct wires) when i read the nand at the very end on the last block i get this error

Error: 208 Reading Block 3FF

Did 3 Nand dumps

Checked them in Jtag tool 0 Non matching Blocks

and in NandCompare 0 Non Matching Blocks

Is it safe for me to continue or resolder the wires?

I haven't updated to 7371 Dash could that be the problem because whenever i burn a disc with the dash it dosn't work i get "mixed media" and im on the first dash so i cant use USB

 

[M AzeeM K]

Have you tried turning on the Xbox360 with disc already in the tray?

Also, don't you have any game which could update to the 7XXX dash?

As for the error, its just a bad block. If you don't have any non-matching blocks, then you can proceed forward. But remember to read out the NAND atleast 4-5 times anyway.

 

[C43Mi57]

http://team-xecuter.com/forums/showthread.php?t=54670&highlight=freeboot+7371
thats a link if you want to update.

 

[Kr4k 4 J4Ck]

Have you tried turning on the Xbox360 with disc already in the tray?

Also, don't you have any game which could update to the 7XXX dash?

As for the error, its just a bad block. If you don't have any non-matching blocks, then you can proceed forward. But remember to read out the NAND atleast 4-5 times anyway.

Yea i have the xbox will turn on fine can u give me some gives that will update to the right dash i dont have dirt 2

3 nand dumps all
1024 block(s) in nand image
0 non-matching block(s) found

http://team-xecuter.com/forums/showthread.php?t=54670&highlight=freeboot+7371
thats a link if you want to update.

I cant update via disc or USB its not working

 

[C43Mi57]

I cant update via disc or USB its not working

I didnt bother with the update you should only have the $$system folder on root of USB stick and restart the console
with stick in.

unless you already knew this..

 

[Kr4k 4 J4Ck]

I didnt bother with the update you should only have the $$system folder on root of USB stick and restart the console
with stick in.

unless you already knew this..

Yea it wont update but the error message is fine?

I have 0-non matching blocks

 

[M AzeeM K]

Which Dashboard version are you currently on?

 

[Kr4k 4 J4Ck]

Which Dashboard version are you currently on?

1st ever dashboard never been on live before

 

[TilVl]

If you dumped the nand just write xell.

 

[Kr4k 4 J4Ck]

If you dumped the nand just write xell.

I just wanted to make sure this Error wasnt anything serious

 

[TilVl]

No it's a bad block. You'll just remap once you go to create your freeboot image.

 

[Kr4k 4 J4Ck]

No it's a bad block. You'll just remap once you go to create your freeboot image.

Oh ok thanks il write Xell now Install the Jtag tomorrow and continue.:smile:

I have to power on with Eject right?

 

[TilVl]

You need to install the jtag part for xell to even work.

 

[Kr4k 4 J4Ck]

You need to install the jtag part for xell to even work.

Lol derp:crazy: il do that all tomroww but i have to start the xbox with the Eject button right?

 

[M AzeeM K]

When only XeLL is written to the NAND, it doesn't matter how you turn on the Xbox360...

 

[Kr4k 4 J4Ck]

When only XeLL is written to the NAND, it doesn't matter how you turn on the Xbox360...

Yea i know just in some tuts like the one XMODS (i think thats his name srry if im wrong) in the video tut he says on using eject button i was Just wondering