Hiya fellas,
just wondering if this is worth an attempt to replace.
I have a Jasper m/b that came to me with a busted Network chip ( E76 with secondary error code 1030 ) when i powered the board up,i removed a Network chip from a scrap Zephyr m/b and replaced the one on the Jasper.Powered up the console to a successful dashboard.
But when i plugged in my wireless network adapter in the rear USB port,my adapter wont work but if i plug my adapter in one of the front USB controller ports,it works perfect.
I've checked over where i've replaced the Network chip to see if i've knocked any components but it looks fine with nothing missing.Now i've removed from the scrap zephyr board the rear Ethernet/USB port ready to transplant onto this Jasper board BUT i'm wondering if it could possibly be anything else that i might have overlooked as to why the ones on the Jasper board are not working.
Any ideas would be truly grateful indeed
just wondering if this is worth an attempt to replace.
I have a Jasper m/b that came to me with a busted Network chip ( E76 with secondary error code 1030 ) when i powered the board up,i removed a Network chip from a scrap Zephyr m/b and replaced the one on the Jasper.Powered up the console to a successful dashboard.
But when i plugged in my wireless network adapter in the rear USB port,my adapter wont work but if i plug my adapter in one of the front USB controller ports,it works perfect.
I've checked over where i've replaced the Network chip to see if i've knocked any components but it looks fine with nothing missing.Now i've removed from the scrap zephyr board the rear Ethernet/USB port ready to transplant onto this Jasper board BUT i'm wondering if it could possibly be anything else that i might have overlooked as to why the ones on the Jasper board are not working.
Any ideas would be truly grateful indeed