RGH Rear USB ports don't work.

[mikey63366]

So did my first solder job and installed coolrunner to my slim xbox..

Glitch is working.. my rear usbs where working after glitching.. but after I put everything back in the case my rear ports stop working. Is there something I may of disconnected. Would take apart again but too lazy to do so.

Thanks

Sent from my SAMSUNG SKYROCKET using Tapatalk

 

[hoggin222]

I've had a few ports go out on normal boards. I would take it out and give it a once over to be sure. If u have same results I would say bad port. I wouldn't think the rgh would have anything to do with it. Hope this helps

 

[shawndezy115]

im thinking something may be shorted . check ur wires post pics PLEASE.
also make sure that ur wire on the back does not have a high spike on the solder point. if it does it can hit the case and become grounded.

normally its a wiring issue or soldering issue. double check ur work.

 

[mikey63366]

im thinking something may be shorted . check ur wires post pics PLEASE.
also make sure that ur wire on the back does not have a high spike on the solder point. if it does it can hit the case and become grounded.

normally its a wiring issue or soldering issue. double check ur work.

I'll take it all apart tomorrow and see if it works out of the case...

just rear usb don't work. stopping working after I put the xbox in the case..