Alright so I'm dealing with an xbox 360 slim trinity. The console was working fine i glitched it a while back but i wanted to upgrade some stuff.. big mistake. I ended up messing up stby_clk and cpu rst. I did fix them but unfortunately when attempting to power on the console it stays green, chip doesn't make any attempts to glitch and eventually the fan starts spinning very loud and the console red dots. At the moment I am using kynar wiring for all of the wires including cpu_rst which im not sure is ok. The original wires have gotten old and a bit short now.
I fixed cpu_rst by soldering one wire from the point underneath the x-clamp to the resistor (r4d4? Cant remember exact name) and have another wire leaving the pad to the chip. I soldered to the left end of the resistor not the right.. not sure if that'd make a difference.
Any ideas? Will post pics soon.
I fixed cpu_rst by soldering one wire from the point underneath the x-clamp to the resistor (r4d4? Cant remember exact name) and have another wire leaving the pad to the chip. I soldered to the left end of the resistor not the right.. not sure if that'd make a difference.
Any ideas? Will post pics soon.
