red,green flash

[dannbond]

I just install x3 to myXbox,it is easy,but flash bios give me all night ,after flash bios 3.003 or 3.0.01 it reboot to some weir sreen it say
service required. Call customer service.....alot language
and red, green eject botton is flash...:-(
What can i do? please help me,thanks

 

[delta exxon]

maybe you flashed with the wrong bios? try using a different bios.

 

[dannbond]

Which one shall I use,I think myXbox iV1.5
Thanks

 

[nartac]

first, make sure you are booting the chip enabled. Just briefly press on the power button and your X3 control panel should light up blue. I suspect you have disabled the chip by holding down the power button a little longer (X3 cp turns red) and because your hd is not locked, you get that service error.

 

[nartac]

secondly, if your control panel is blue and you still have FRAG, make sure you have flashed the correct bios for your xbox version 1.5. Make sure it's not 1.6 or something like that since it uses different bios.

 

[dannbond]

thanks

 

[dannbond]

what different x3_1959 & x3_3.0.3(1) or they the same,if not the same where can I download X3-1959?

 

[nartac]

well, flashbios 3.0.3 or 3.0.1 are legal bioses. Their functions are just for you to flash hacked bioses on your chip and nothing else except to lock and unlock harddrives. The Xecuter 1959 bios is an illegal bios (hacked bios) that if use with X3 will provide more functionality to the chip.

As for where to download, read this thread: http://www.teamxecuter.com/forums/showthread.php?t=23862

 

[Bsharon]

It could be because your Xbox H.D. is unlocked. Check to make sure that in the flashbios screen that you lock the H.D. although I'm new at this so don't really listen to what I say
lol
Brian

 

[SnaveZ]

I can't get to the control panel thing...

my box won't boot...what do I do to get to the options again for flash network....flash disc...lock and unlock drive?

 

[SnaveZ]

well...my box does boot...it just does the 3 times thing...on off...on off...on blank screen

 

[Cheb41]

Go over your solder points again!!!

http://www.teamxecuter.com/forums/showthread.php?t=11367