Red light on front panel

[Legopirate]

Just finished putting the x3 into my crystal 1.6, it all powers up and works like a normal xbox, but no matter what i do it wont enable to modchip, i'd checked over the D0 solder points, im using the rebuild board not doing the wire part.


so ya no matter if i hit the power buttonquickly or hold it, the unit boots up normal mod disabled


im gonna recheck the solder points for the 3rd time :< wish i had a multimeter, well if anyone knows something else it might be let me know

0;

ill post again after i recheck.

 

[Legopirate]

ok now it sorta works, i get the blue light but now it FRAGS

but when i hold down on paower and the chip is disabled the system works fine, also pressing both power and eject does nothing still :<


;0

 

[Legopirate]

ok well
i ranpoutta the thin ass solder that came with my chip.

but now when i push power and eject it shows the pinky colour then it turns off turns on blue then frags

;/

so o;

i guess ill just keep on checking the jobs :< but they al look good

 

[Jango]

check the d0....

 

[Legopirate]

k
atleast my box still works

thats a good sign

 

[Legopirate]

f**k me i just noticed the 5V wire camt untacted i had tape holding it down so i didnt notice :<

 

[Legopirate]

nope still frags when i try and use the chip even after fixing that 5v :< back to the D0 :[


leave it to me to take something simple and mess it all up

 

[Legopirate]

=\
still have no luck

could it be somehting other then the D0? maybe a different pin?

 

[Legopirate]

ive coem to the conslusion its becuase i didnt prep the D0 :/
becuase the guide on this site didnt mention it :/

but its the only thing i can think of :\

 

[Legopirate]

OK IM DONE
it works what i did was i took out the piece of sh*t little rebuild board and used the WIRE method to :/

the little board was a great idea but well

it wasted 4 hours of my life


anywhoo sits working now so im gonna put it back togather and start playing some games

peace out

 

[Jango]

good to hear it works

 

[doncheeba]

2 Quick questions.

I've recently updated to iXtreme LT.

I recently got hold of Darksiders. Checked through abgx360 (1.0.2) - got all the success messages......but whats this SSV1 thing I'm hearing about? Would I have had the success message with this - though I read a post on this site saying it should really be SSV2?

Secondly - I've heard there is an update for the game to get rid of the screen tearing. Is it ok for me to sign into live and boot the game up / then update the game with the patch and sign back out?

Just wondered if anyone could give me sound advice so I dont get my second box banned?

Thanks in advance..

 

[Skiloo123]

Re: 2 Quick questions.

no one knows if your gonna be safe when the next bann wave hits.

did you have an earlier ixtreme (1.61 or 1.6 or 1.51 or 1.4) when you
did the 8955 fall update?

if you did then your system is already flagged and when the next bann wave
hits you'll get banned.

if you had LT installed before the update you have a better chance of not getting banned if it is truely doing it challenge and responce codes correctly

with LT you need to make sure your games have ssv2 and splitvid.
if you patch and they say ssv1 then you'll have to log into abgx360.net and manually download the ss & matching dmi patches to upgrade it to ssv2.

 

[doncheeba]

Re: 2 Quick questions.

Its a completely new box - that has just been flashed directly to LT. So no previous versions of iXtreme ever on this box.

I havent patched anything - I just ran it through the latest ABGX (after downloading the wave 3 and wave 4 extra files and putting them in the right place) - and it said 'success!' - so I assumed it was fine. Never looked for what SSV it was.

So if it IS SSV2 can I safely log onto live with it to download the update automatically for the game?

Thanks for your knowledge.

 

[skybus]

Re: 2 Quick questions.

iXtremeLT and SSv2 is the safest you can get...for now.