GENERAL red light on power brick

[brettsog]

was playing my glitched 360 last night no problems. got up this morning and my powerbrick light was red when i plugged it in (i unplugged it overnight). thing is ive tried 3 different power supplies and its happening on all of them. not getting any response from the console. any ideas on what has happened??

 

[diaboliq20]

short on the board somewhere? - u may have dislodged something when unplugging the brick?

 

[Martin C]

Check your wiring inside. My guess is a wire has come loose and is shorting the console's standby voltage.

 

[brettsog]

I'll check it tonight. I doubt it though. I used resin to sit the wires in place.

 

[AkhmedovIR]

I have same problem, its motherboard problem. I replace it and all work fine.

 

[diaboliq20]

I have same problem, its motherboard problem. I replace it and all work fine.

:eek2: That's a bit extreme isn't it? lol......it'll just be a short.....u just gotta locate it - that's all

 

[brettsog]

Are there any common places?

 

[diaboliq20]

first thing to check is your wiring.....I know it's glued in, but check it first....next - check USB ports and AV port- they're always an ass lol.....make sure nothing is nipped in your wiring aswell

 

[brettsog]

Found the bastard. Where I grounded the cmod. A bit of solder had melted off the edge of the av port and was shorting on the board

 

[Martin C]

Glad you found it!!