Red light on psu after soldering

[benjamin94]

Console Type: Jasper
NAND size: 16
Dashboard version: 2.0.16537.0
CB version: Dont know yet how do i find this out?
Screenshot of NAND details from J-Runner: Not yet
J-Runner log: Not yet
updflash.bin log (if applicable): What is this?
Image of R-JTAG board:
View attachment 21778
Images of close-up soldering to motherboard:
View attachment 21779
View attachment 21780
View attachment 21781
View attachment 21782
View attachment 21783

Description of problem: I have all soldering done and it looks good to me but now when i connect the power cable to the motherboard the fans move a little bit but then the PSU led goed RED. If this is not enough details please tell me.

Was the console working before you started: Yes perfect

 

[justice10]

ck ur soldering something touching

- - - Updated - - -

make sure also that ur usb ports aren't bent double ck soldering and usb ports

 

[benjamin94]

I also forgot there came a little bit of smoke out of the R-JTAG QSB from the chip left to the chip with the TX text on it. you can see there is some black dirt around it.

But as you can also see on the picture i did not make any soldering mistakes on that place. So maybe its a bad R-JTAG QSB?

 

[justice10]

then there a burned pad see if u can do direct wire instead of qsb

- - - Updated - - -

ur pic files don't open

 

[justice10]

ur pic files don't open

- - - Updated - - -

ur pic files don't open

 

[benjamin94]

Hey, i switched all DIPS to off except 7 and 8 to ON now it boots but the fans are blazing at like 12Volt it seems.

But it turns on automatically even when i dont press the turn on button on the xbox, it turns on from it self as soon as i connect the power supply

 

[justice10]

unplug power 4 5mins then plug bk n n see what happens

 

[benjamin94]

I tried, but its still powering on right away?

 

[XMonsterModsX]

Remove the rf module and see if it still powrrs on ny its self

Sent from my GT-I9500 using Tapatalk 2

 

[benjamin94]

Yes, its still powering on, this way im not able to read nand or write xell or anything jrunner related

 

[XMonsterModsX]

Ur gonna need to remove the qsb that has the brnt pad

Sent from my GT-I9500 using Tapatalk 2

 

[benjamin94]

But thats the R-JTAG it self, can i get any refund you think?

 

[XMonsterModsX]

No u damaged it urself. I would contact them and see. Before that if you still ha e a retail image on tumhe console then remove 5v and try to see if it still boots by itself

Sent from my GT-I9500 using Tapatalk 2

 

[benjamin94]

Its all stock so let me try to remove the 5v and check if it boots normal.

 

[benjamin94]

Its still doing the same thing man.

 

[Martin C]

Time to make a choice:

1. Post pics so we can all see.
2. Bin it.
3. Send it for repair.

I'm assuming options 2 and 3 are probably your best options anyway.

 

[benjamin94]

Cant you see the pics in the first post, anyway here are they:

https://www.dropbox.com/sc/nyuyk7u09s4f3q2/R-AT1WxGcs

 

[benjamin94]

I contacted ck3.co.UK and told them if i can get a new one as im pretty sure my soldering is OK.

 

[lesta_smsc]

I saw this on jtag but it was basically shorting so red light as soon as you pressed power on button. Also this person bad done reflow to hana and accidentally pressed on the chip and the solder flowed outside chip! That's now dead for sure as no point trying to fix that!

Sent from my GT-I9300 using Tapatalk 2

 

[benjamin94]

The psu led is now green as soon as i connect it, and when i turn it off it goes to orange.