red Light >slim360>after 12xxx to 14699 [urgent]

[uxmanz]

[solved]red Light >slim360>after 12xxx to 14699 [urgent]

i have slim xbox with dash 12xxxx something...
i have coolrunner TX installed.....

after dumping two nands successfully


i patched ecc got cpu key successfully from xellreloaden

//-----------every thing was ok till now------------
created freeboot nand image of 14699

used xellreloaded to to update nand by putting xenon.elf and nand image in fat formated usb.....


it showed some bad blocks and showed msg to shutdown....

after that as soon as TX coolrunner times the box it shows red light....
im am stucked

help me!!!
//------------------------------------------------

 

[frazzeld]

Do you remember the errors? was it something like 240 seems bad!
create another image with Multibuilder v0.7 then reflash

Edit: post a screenshot of your nand in 360 flash tool

 

[uxmanz]

well i dont remember the error.... any ways i reflashed it with nand pro using lpt....

i flashed falcon before and every thing went ok.....

iv read http://www.team-xecuter.com/forums/showthread.php?p=498012#post498012

page i think the problem is with LDV... well ill try again tonight...

@frazzeld if you have any other thoughts plz share and thanx

 

[jtag360.nl]

Best is to buy a Nand-x or USB spi-flasher.

If you made a nandflash.bin by Multibuilder v0.7 then it must be okay.

Try to flash the nandflash.bin with your LPT-Cable. I know it will take 40min. but it is worth to try.

Succes.

 

[uxmanz]

@jtag360.nl :...... well i dont have Nand-x or USB spi-flasher...so i did that with lpt
and i used lpt for other Phat xboxes....it works....

and image is with built with multibuilder

 

[uxmanz]

http://www.team-xecuter.com/forums/showthread.php?p=498012#post498012


problem was with LDV.... and solved


thanx every one!!