Reflashing nand back to stock

[kapil888]

Hello everyone, I have a complete RGH install that works great. Unfortunately, I feel like going on live again with my xbox. I do have the stock nand and cpu key (and all that good stuff).

Could someone please tell me how to flash my original nand back through nand pro, Jtag tool, or even J-runner?

Also, would I be xbox live safe?

Thank you so much for your support.
~Kapil :biggrin:

 

[ball00]

Just use Jrunner and build a retail image of the same dash or higher than you have using the option in Jrunner. Flash that to your console and youre good to go.

Should be safe but people can debate that depending on whether you've unlocked homebrew or emulator achievements on the rgh.

 

[Coleman]

Load your original NAND in jrunner and click write NAND. Xbox live safe yes.

 

[Acton1]

Just use rawflash4 and your nand dump but you will have to rename it the nandflash the put the files to a usb pen and boot xell and shut off when prompted

 

[Martin C]

Just remember that if this is a phat console, if you just reflash the stock NAND back and update via XBL, there's no more RGH until RGH 2.0 is released.

 

[Argentum]

I have done it before on my slim ... I used Xnandhealer, you can use j-runner to
Choose your dash and creat a retail nand and you are good to go.

I am on XBL with no prob at all

 

[Martin C]

I have done it before on my slim ... I used Xnandhealer, you can use j-runner to
Choose your dash and creat a retail nand and you are good to go.

I am on XBL with no prob at all

Read my post again.

Slim != phat

 

[kapil888]

Lol, forgot about the CB_B update. Oh well, all good things must come to an end at some point right (at least until 2.0 comes out). Thank you everyone.

So can I do it via rawflash or would it be safer to open the console up, attach a nand x and flash like that?

 

[Martin C]

You'll be ok if you build a 14719 retail NAND. Just don't accept an official update.

 

[kapil888]

You'll be ok if you build a 14719 retail NAND. Just don't accept an official update.

So just build a 14719 image in J- Runner and flash it to the console using J- Runner?

Could you clarify what you mean don't accept an official update?

Do you mean never ever accept one after I flash a stock nand on or dont accept an update in order to make my nand to stock?

Thanks for all your help Martin. I am a bit out of the loop so to speak.

Edit: re read your posts Martin. Thanks for the help