Reflashing stock.. lite-on MTK question

K

kisk9

Junior Member
Jul 12, 2012
23
0
Have this box flashed with 1.1 and I'm going back to stock to update since we haven't even powered it up for a year+.

I don't think I saved a copy of my OFW, but I have all my keys (Dummy.bin) and a downloaded stock fw for my DG-16D2S.

My question is: In JF > MTK Flash > Drive Properties it has "DVD Key: Not Found". I'm 99% sure this is normal, but I just wanted to make sure before I flash back to stock. Is this due to it being a lite-on and needing the probe?
 
K

kisk9

Junior Member
Jul 12, 2012
23
0
Ok flashed back to stock and did the dash update... OFW version is 74850c.

Now I am trying to flash 3.0 ... load my dummy as source. Which 3.0 fw do I use? I thought all the 74850c's used the LTPlus-0251-v3.0.bin, but when I try to spoof it doesn't want to mess with the ID or drive serial...

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Mon Jul 16 21:03:05 2012

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.18

Found 1 I/O Ports.
Found 1 Com Ports.
Found 3 windows drives C: D: E:
Found 1 CD/DVD drives E:

Loading firmware file C:\$_pers\360\_kisk_keys\Ori_2_iXtremeLTv1.1\key01\Dummy.bin
MD5 hash: 3e2ece1117b3e0393c4edd8912d63dd5
Inquiry string found
Identify string found
Drive key @ 0xA030 ADA620612BC4869A8FA2C9EA0B45673D
Firmware Osig: [PLDS DG-16D2S 7485]
Firmware is: DVDKey32 extract
Loading firmware file C:\$_pers\360\Tools\JungleFlasher.0.1.92.Beta(304)\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0251-v3.0.bin
MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target

Target rev is LT 02510C, serial info not copied
Click to expand...
Is this normal or am I using the wrong target fw?

---------- Post added at 21:16 ---------- Previous post was at 21:07 ----------

In other words, shouldn't there be a target firmware version 7485?? I don't understand this part.
 
BL4K3Y

BL4K3Y

VIP Member
Jul 7, 2010
13,721
118
Colne, Lancashire (UK)
That is correct, assuming your console is running the latest dashboard (15574).

The OSIG for phat Lite-On drives was changed to 0251 after the 1314x update.
 
K

kisk9

Junior Member
Jul 12, 2012
23
0
Ok that must be it, because *just* updated to 15574 using stock fw. So basically just ignore these ID/Serial messages and I'm safe to flash?
 
K

kisk9

Junior Member
Jul 12, 2012
23
0
Just as a note, the downloaded stock fw that I just loaded to do the updates were from a loong time ago. Should I have downloaded an "updated" stock firmware before updating, or was the "original" stock fw fine for a dash update? Not sure what dash version I had before I just updated it.
 
Last edited:
K

kisk9

Junior Member
Jul 12, 2012
23
0
Thanks a lot for the clarification on the OSIG change.. I thought I f'd up :)

Flashed successfully and about to test.

Thanks again!!
 
K

kisk9

Junior Member
Jul 12, 2012
23
0
Got spooked for a sec, first backup I put in wouldn't read -- disk was dirty ;x

Cleaned off and booted fine. Took an XVal reading and it turned up clean. Is XVal still viable?
 
K

kisk9

Junior Member
Jul 12, 2012
23
0
Only tried 1 backup and I believe its saved to the HD -- it worked. Would this matter?
 
You must log in or register to reply here.