Hello all, I jtagged my first console successfully however I am having issues with the console freezing. I have been going over it and I decided to restore it to default with my original NAND backup, that backup fails. I used my second nand backup and the console works but it freezes!
I am starting to think I got a bad dump and this being my first JTAG I have done myself I am really not sure what to do now.
I put the NAND in JTAG Tool, downloaded a clean NAND, did the repair and JTAG Tool did report it repaired some things. I saved the repaired NAND and after flashing that repaired NAND the system will not boot.
I have the following backups..
1. nand.bin
2. nand2.bin
3. kv.bin
4. kv2.bin
5. c1.bin
6. c2.bin
When I compare the original dumps nand.bin and nand2.bin I get "5 non-matching blocks found". However when I originally did the dumps (prior to knowing about JTAG Tool) I compared the NAND's with nandpro and received no errors.
System specs - Zypher 7371 with AUD_CLAMP and DVD_TRAY. I have tried 12625 and 12611 dashes with same result.
If anyone can guide me in the right direction I would greatly appreciate it.
I am starting to think I got a bad dump and this being my first JTAG I have done myself I am really not sure what to do now.
I put the NAND in JTAG Tool, downloaded a clean NAND, did the repair and JTAG Tool did report it repaired some things. I saved the repaired NAND and after flashing that repaired NAND the system will not boot.
I have the following backups..
1. nand.bin
2. nand2.bin
3. kv.bin
4. kv2.bin
5. c1.bin
6. c2.bin
When I compare the original dumps nand.bin and nand2.bin I get "5 non-matching blocks found". However when I originally did the dumps (prior to knowing about JTAG Tool) I compared the NAND's with nandpro and received no errors.
System specs - Zypher 7371 with AUD_CLAMP and DVD_TRAY. I have tried 12625 and 12611 dashes with same result.
If anyone can guide me in the right direction I would greatly appreciate it.