Replacement PCB (Slim) Unlocked Question

[GeekHeat]

No I want to get a hold of one of them so I don't need to buy replacement PCB every time someone with a 0272/9504/0225/1071/0401 wants theres flashed.

I always have a spare replacement unlocked PCB just in case I mess up the kamikaze.

 

[briggs01]

the only thing you need to leave in the xbox in the 4gb nand reader if its a corona board , thats unless you are very good at desoldeing , i have wired mine up so i can use it over and over again , even with the kamakaze kit it doesnt meed you wont have to buy a replacement pcb its all down to where and how far you drill , i have done loads but still messed one up2 weeks ago , if you get the ltu2 board you dont need alcohol etc you just click slim 2 and click unlock

 

[Rowan]

the only thing you need to leave in the xbox in the 4gb nand reader if its a corona board , thats unless you are very good at desoldeing , i have wired mine up so i can use it over and over again , even with the kamakaze kit it doesnt meed you wont have to buy a replacement pcb its all down to where and how far you drill , i have done loads but still messed one up2 weeks ago , if you get the ltu2 board you dont need alcohol etc you just click slim 2 and click unlock

I would rather just buy the boards but in the UK I cant find them.

 

[Rowan]

I also just opened both xbox's and one is 1532 and other is 1175. So looks like I do need to the kit and 2x LTU2 boards to be able to do them.

 

[briggs01]

so you need a nandx or jrunner to read nand , 4gbnand reader if you have a corona , a coolrunner chip or slim proto i just use coolruner rev c , read nand . boot to xell to get cpu , load cpu key , extract files , open jflasher , load ltu2 firmware , ,right click grey area , click key/cr go to your extracted file files load key.bin and then c/r.bin but when you go into your extracted files it wont say key.bin or c/r.bin not sure if its only on XP what i am using , it will just say KEY and C/R when you have loaded both click ok then save it somewhere , then write it to ,you board , job done

 

[Rowan]

so you need a nandx or jrunner to read nand , 4gbnand reader if you have a corona , a coolrunner chip or slim proto i just use coolruner rev c , read nand . boot to xell to get cpu , load cpu key , extract files , open jflasher , load ltu2 firmware , ,right click grey area , click key/cr go to your extracted file files load key.bin and then c/r.bin but when you go into your extracted files it wont say key.bin or c/r.bin not sure if its only on XP what i am using , it will just say KEY and C/R when you have loaded both click ok then save it somewhere , then write it to ,you board , job done

Thanks

I've been searching online for a while and can't find anywhere that sells the equipment I need most of it is discontinued.

 

[TheGlichter]

Thanks

I've been searching online for a while and can't find anywhere that sells the equipment I need most of it is discontinued.

Go look for other glitch ships and hardware cause waiting for stock refill is something we are all waiting for the last months..something is wrong