LITEON DG-16D4S - SLIM Replacement PCB v1.1 not working?

[GameCustomZ]

So I installed the v1.1 replacement PCB for the Liteon 16d4s. Everything seems to have gone the right way until I plugged in the drive to the xbox. The drive will not open. The power light continues to blink on the console. I flashed the PCB to the LT 3.0 firmware. I locked the PCB up to the 0x8C status, and also flipped the switch on the PCB to locked status after sending Outro. What could be the issue?

 

[nofeloniesyet]

sounds like either no firmware or maybe a wires hooked in wrong if you soldered them? the other possibility is the board is fake,or bad,which almost never happens with tx gear imo.
got a jf log?

 

[GameCustomZ]

I don't believe I have the JungleFlasher log of me writing the LT 3.0 firmware. I flashed it to stock firmware because I totally forgot to update to the latest dash. I then updated to LT 3.0. It is real TX product, I bought it from XConsoles. I did not solder the wires. I simply cut the old PCB wires in half and stuck them in the correct colors. Should I maybe strip the wires and then put them into the color coded box?

 

[nofeloniesyet]

try that cause it dont sound like pcb is getting power

 

[GameCustomZ]

Well stripping the wires got the drive to power up and actually work, but now when I put a real game or back up game in, it just reads Play Game but nothing will run. There is no game picture behind the Play Game text as well. Maybe I flashed it wrong? Is there a tutorial out there on how to flash the replacement PCB? Thanks for all the help so far.

 

[GameCustomZ]

Actually it is reading XBOX 360 and original XBOX games, but no backups...

 

[nofeloniesyet]

there is a chance here that you have a weak laser i guess,i have seen this many times,its just too weak to pick up backups,cause they are much crappier quality wise than retails.you ever played backups on this particular console?

sounds more like a fw issue though tbh,did you get a full dump of the drive? or just slimkey?

 

[GameCustomZ]

No, it was a failed Kamikaze.

 

[nofeloniesyet]

try reflashing the drive with jf,and get a log

 

[GameCustomZ]

If I read it correctly, I think I forgot to flash it to LT 3.0....I just reflashed it to LT 3.0, will see how it does. I locked it back to 0x8C, Outro the drive, then switch PCB to Locked status. Powered off CKi

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.94 Beta (320)

Session Started Fri Mar 08 21:26:11 2013



This is a Wow 64 process running on 8 x 64 bit CPUs

X360USB PRO detected, Version 0.18



portio64.sys Driver Installed

portio64.sys Driver Started, thanks Schtrom !

Found 7 I/O Ports.

Found 2 Com Ports.

Found 7 windows drives C: D: E: F: G: H: I:

Found 3 CD/DVD drives D: E: I:



Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x8C

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x8C

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Sending Spi UnLock request to Port 0x0000

.

Spi Status: 0x00



Getting Status from port 0x0000



Getting Status from port 0x0000

Serial flash found with Status 0x72



Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................



Dumped in 9189mS



Lite-On Dump file saved to Lite-OFW.bin

Loading firmware from buffer

Drive key @ n/a 62D4CFE467834110842B37C504AE7625

Firmware Osig: [PLDS DG-16D4S 0225]

Firmware is: Stock

Key database updated



Auto-Loading firmware file C:\Users\SPARKGFX\Desktop\XBOX Mods & Firmware\JungleFlasher v0.1.94 Beta (320)\firmware\LTPlus-0225-v3.0.bin

MD5 hash: 1a38d3a2a6519339599fa1866642c513

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D4S 0225]

Firmware is: LT-Plus 3.0

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target





Loading MTK_Flash source file



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !





Sending Spi Lock request to Port 0x0000

Spi Status: 0x8C

Sending Vendor Outro to port 0x0000

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (4 - Desktop)

Key is: 62D4CFE467834110842B37C504AE7625

Key has been tested and verified, thanks C4eva !

 

[nofeloniesyet]

everything looks ok.should be fine

 

[GameCustomZ]

Yes!!!! It is working now. Thanks for all the help. Now if I can only find out how to get the Drive Key from the other failed Kamikaze slim I have sitting here. I accidently cut the wires to the PCB before getting the key? Have any suggestions on that one? :frown:

 

[nofeloniesyet]

just hook the pcb itself up to ur flashing gear,dont need rest of drive