LITEON 0225 Replacement PCB

B

BHL ADDZ

Full Member
Jan 21, 2010
73
8
Hey All

I had a nightmare with my Slim 0225 so in the end bought a replacement PCB but even that's giving me trouble, it worked great for about an hour then started to not load my back-ups and even saying "play DVD" with original games, does anyone know what I can do to fix it, I re-flashed it today and it worked once until it was rebooted now it does the same thing as before!

Here is a video, 1st game is The Darkness II (XGD3) and 2nd Original COD4:

[ame="http://www.youtube.com/watch?v=z7kgpr7e0hY"]T-X Forums - YouTube[/ame]
 
B

BHL ADDZ

Full Member
Jan 21, 2010
73
8
JungleFlasher 0.1.92 Beta (304)

Session Started Tue Feb 07 13:07:20 2012



This is a 32 bit process running on 3 x 32 bit CPUs

X360USB PRO detected, Version 0.18



Found 1 I/O Ports.

Found 0 Com Ports.

Found 8 windows drives C: D: E: F: G: H: I: J:

Found 2 CD/DVD drives E: F:



Loading firmware file C:\Users\ADDZ\Desktop\0225 Chip Unlock\Dummy.bin

MD5 hash: 69e03ce685f770cb8d6a07da22806b0e

Inquiry string found

Identify string found

Drive key @ 0xA030 REMOVED

Firmware Osig: [PLDS DG-16D4S 0225]

Firmware is: SlimKey Extract

Auto-Loading firmware file C:\Users\ADDZ\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0225-v3.0.bin

MD5 hash: 1a38d3a2a6519339599fa1866642c513

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D4S 0225]

Firmware is: LT-Plus 3.0

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target



Sending Vendor Intro to port 0x0000

Status 0x80

Re-sending Vendor Intro:

................

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !





Sending Spi Lock request to Port 0x0000

Spi Status: 0x8C

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (1 - N/A)

Key is: REMOVED

Key has been tested and verified, thanks C4eva !

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..
Click to expand...
That's the log from yesterday, I'll get some pictures now...

---------- Post added at 11:52 ---------- Previous post was at 11:48 ----------




Is there a way to bypass the sister board or is that needed?
 
B

BHL ADDZ

Full Member
Jan 21, 2010
73
8
I made sure all the wires are in tight and the screw is on the metal not the plastic and it worked until I rebooted, it's back to the same fault again.
 
B

BHL ADDZ

Full Member
Jan 21, 2010
73
8
Martin C said:
so it works until you reboot.

What if you unplug the PSU from the console for a minute, then retry?
Click to expand...
Tried that now and still nothing, it's got me lost.

It will show the game image if I re-flash it then after I dashboard/turn off it's back to the same problem again.
 
B

BHL ADDZ

Full Member
Jan 21, 2010
73
8
Martin C said:
Do originals do the same thing?

edit: yes, apparently.

flash your stock OFW back.
Click to expand...
Flashed back to stock and it plays COD4 no probs, I'll reboot a few times to see if it's going to fail like before mate, thanks for your time BTW.

I'll come back and edit after a few reboots...

---------- Post added at 12:54 ---------- Previous post was at 12:50 ----------

Pulled the power for a min then turned it back on and it's saying "Play DVD" that's what it was doing to Originals before.

It's got me lost now I had a drama with the chip now the PCB is driving me mad, not sure what to try next! :(
 
B

BHL ADDZ

Full Member
Jan 21, 2010
73
8
Martin C said:
I don't think you're doing anything wrong, but I would contact your reseller at this point.
Click to expand...
Thanks a lot Martin, just my luck man this week has been a long one and it's only Wed :p

I've been in touch with the reseller, used them for a while now and hopefully have no problems changing this one over because it does seem like it's a bad board :(

Cheers again mate,
ADDZ
 
You must log in or register to reply here.