Replacing jasper drive problem.

M

Mikeemyke2

Full Member
Nov 2, 2011
70
0
Hi need your help guys. My jasper lite on 74305c drive is defective but i was able to save my dummybin before. Now my problem is..i was able to buy a spare 8385c (i think) drive board but i dont know how to inject mysaved dummybin. I tried loading it to firmware tool then open source firmware,then pressed yes for autoload then proceed to mkt flash to use lite on erase but a prompt appears that the "target dvd wasnt save do you want to proceed" i didnt proceed coz i think my procedure is wrong. Any advice what steps i need to do?

Thanks in advance guys!
 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
The most important question is:

What dashboard are you running currently on your console ?
 
-DoC-

-DoC-

VIP Member
Jul 23, 2004
682
48
US
You should be able to flash the drive to OFW 0251 - spoof your DVD key to the target that you extracted from 74305c.

I'm pretty sure 13599 updated the drive firmware to 0251.
 
Last edited:
hilly360

hilly360

VIP Member
Dec 17, 2011
226
33
DURHAM, North East. UK
Mikeemyke2 said:
Hi need your help guys. My jasper lite on 74305c drive is defective but i was able to save my dummybin before. Now my problem is..i was able to buy a spare 8385c (i think) drive board but i dont know how to inject mysaved dummybin. I tried loading it to firmware tool then open source firmware,then pressed yes for autoload then proceed to mkt flash to use lite on erase but a prompt appears that the "target dvd wasnt save do you want to proceed" i didnt proceed coz i think my procedure is wrong. Any advice what steps i need to do?

Thanks in advance guys!
Click to expand...
this happened to me when i changed the drive in my spare console.

just procced. i was wary :eek2: at 1st but thought long as i got the key needed saved all should be ok. i procceded and all went well. :wink:
 
You must log in or register to reply here.