Replacing modchip???

old_mcgroin

Noob Account
Mar 27, 2004
4
0
Hey guys, not sure if this is a question about 2.3 or 2.6 but here goes...
i have a 2.3b lite modchip thats gone faulty. The xbox frags 3 times and then the light on the front flashes red so i think its the modchip. Can i just unplug the modchip from the wires that are attched to it and replace it it with a another modchip?
If i can, do i have to have the same modchip or will another modchip, such as the 2.6, work with out me having to flash or do any jiggery pokery?

Thanks
 

Fantmx

VIP Member
Feb 15, 2004
2,274
0
Solid red? Were you messing around with your EEPROM?
 

Catalyst

VIP Member
Mar 16, 2005
2,080
0
San Antonio
Fantmx said:
Solid red? Were you messing around with your EEPROM?
I think he said it's flashing red.

You can replace the 2.3 with another 2.3 but not with a 2.6 or X3

Can it boot disabled?
 

me2k4

Full Member
Jan 1, 2004
53
0
CALIFORNIA
First try check the d0 point if thats not the problem flash the 2.3, That chip is old by not that old, but sometimes get corrupted.
Or if you want you can get another 2.3 but you still have to flashed. (Good luck finding a 2.3).
Or Just get 2.6CE looks cool with the hdd,lan leds, Also you have to use the cables for the switch because the cables from the 2.3 wont fit in the 2.6. Heck you have to replace the whole cables because the d0 cable is located diferent on the chip.
Good luck
 
Last edited:

Fantmx

VIP Member
Feb 15, 2004
2,274
0
Yeah, but I meant is it flashing only red, or red and another color.
 

Catalyst

VIP Member
Mar 16, 2005
2,080
0
San Antonio
Fantmx said:
Yeah, but I meant is it flashing only red, or red and another color.
true true...

Just go buy an xbox 360... they work... most of the time:rolleyes:
 

old_mcgroin

Noob Account
Mar 27, 2004
4
0
its a flashing red not a solid red and only red... no other colour.

How do i reflash the chip?

All the connections have been checked and they are ok.

I don't think its a solderless install. There are some wires soldered onto the motherboard coming from the chip.

(and when the chip is disabled i get error code 13)
 

Fantmx

VIP Member
Feb 15, 2004
2,274
0
13 - kernel - Dashboard launch fail (due to missing/bad key, or anything else that would prevent it from running) and the dashboard didn't specify why it failed.

Xbox error codes explained <-- Link.

What happened before you started having this problem?
The chip has two banks, so you may be able to boot off the other bank.