Replacing MS25 by Flashed Toshiba 47D!!!! Help guys!!!

[pc69]

hi mods, guys

i bought from someone already flashed toshiba 47 d wit saved origi.bin....i installed but only movies are working...

what must i do to use this drive with my xbox 360...and i had some doubts about flashing ...can mods or some one give me more advice???

Doubts were!!!:

it helped a lot sind im studying for a week now...last question do...i ll get about drives...but my hard disk where i boot windows from...must i unplug this hard drive also>? ???..disable from bios!!!! did anyone tried this before???? i wonder...

and i bought a st 108 card for my hitachi drive ...on the chip u can read ...
SILLICON IMAGE ,
SATA LINK,
SIL3112 ACT 144
021055.1s
0232
1.1..........Is this the right one????????

i think i dont have raid on my motherboard sinds i could not find any options on my bios config....do i need to disable raid on this card or on 6421 a for samsung...do they even have raid options...??? i plugged in but i didnt tryed yet....i installed them both on my motherboard... this is ok right??? both cards on same motherboard?

Textbook and Vinomarky thx guys...i feel im almost there..(Figuring out!)

thx in advance

 

[hmelo]

You need to flash your key and version from your original samsung drive. Your key will allow you to play backups and changing the version of the hitachi to report as a sumsung ms25 will prevent E66. Injecting keys and spoofing your drive versions can be done with firmware toolbox.

To flash these sectors to your drive, you will need to force the drive into modeB. If the drive you purchased has newer Xtreme firmware on it, you should be able to open the tray, then unplug the 360 power cord, then plug it back in and boot the system. This should force it into modeB. If not, you will need to use the slax method or the two wire method.

Do you have a dump of your original samsung firmware that contains your drive key?

Caster.

 

[pc69]

so i need to flash the 47 d to original form with original sinds its already flashed....then i need to make a original bin from ms 25...and flash hitachi with this ms25 firmware key??? right...and spoof after with toolbox...