Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

J

josh1095

Senior Member
Aug 31, 2011
132
0
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

im a fairly patient guy, would i be crazy to expect a full how to, jtag and everything for a the falcon MB in a month? i assume the slims will get the most attention for now but from the front page the guy wrote the falcons should be succeptible to this hack, he just hadnt got one yet to test. btw, thanks to all involved. and for M$, this may not be a bad thing. if the falcon jtag doesnt happen im more than willing to go buy a brand new 4gb slim. hell, i might get another one anyway for a media servier in the bedroom...
 
H

HungrySage

Full Member
Jan 27, 2010
63
0
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

after fapping for the first 56 pages, and no I'm not a noob, I've got some questions.

1. Can consoles now be exploited?

2. disregard the first question, that was a joke.

3. I've never owned a jtag, but with all this reboot and timing information, I am a bit confused on how a console starts up. How quick will the console boot up to the dashboard I have configured (Xell or whatever)? and is the previous jtag faster then this reboot glitch? Does this only have to be done once, and it boots up quick the rest of the time?

4. Other then the way this exploit occurs, is there a difference between a jtag console and a reboot glitch console? And if possible, can you also compare them to the previous Xbox 1 console's Xecuter chips? In the long run, do we all basically get the same stuff?

5. Other then the NAND-X and some easy tool to be released mentioned by Uber, will I need any more tools?

I've been soldering ever since Xecuter was out there for the original Xbox and my first solder test was an Xecuter 2.6 :) Since then I've only been flashing consoles, so I've only got the latest probe, CK3 Pro Rev 4, USB pro, and diligently waiting on the arrival of the CK3-CP. I want my slim to be the same as the old Xbox 1 with emulators and XBMC. Those were the good ol' days!
 
M

midway22

Full Member
Mar 19, 2011
39
0
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

Long time lurker but decided to post my experience so far. Iv JTAGed my fair of consoles since the exploit first came out so decided to try my luck at dumping the nand

Slim with 0225 drive, used my trust ol LPT cable and soldered it to the points as per the diagram. Dumped the NAND twice, compared images and they matched perfectly.
Patiently waiting for my shipment so i can finish off the mod, some of the points are a little tricky.

Xecuter guys... you got any info or tidbits on if a rebooter has made some progress ;)
 
S

spookyman166

VIP Member
Jun 13, 2011
192
0
NZ
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

nine3o said:
Opus does have HANA.

I guess I should have been a bit more clear in my last post.

The glitch right now for the SLIM uses the HANA chip to exploit.

For the Phat consoles (exluding Xenon and Falcon) they use the CPU clock cycle to glitch and exploit the device.

In the future there could be exploits for Xenon and Falcon because they use the CPU frequency to glitch, they can do it but has not been done yet. It comes down to what hardware they have on hand when they test their exploits.
Click to expand...
Push come to show you can just use your own crystal for the Xenons. Dont worry, someone will make it.

People have to realize that this has been offical for about 3 to 4 days now. You know how long it took to get to this? 3 YEARS!!!

REspect for All the Devs.


and ive also seen some noobs thinking that team x and jungle did this. They didnt, but they are making this a spoon feed to the noobs, so just be patient. You cant run sh*t off of this yet as there is no (public) rebooter for slims and most phats.
 
C

Chickenfloss

Full Member
Apr 27, 2011
64
0
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

HungrySage said:
after fapping for the first 56 pages, and no I'm not a noob, I've got some questions.

1. Can consoles now be exploited?

2. disregard the first question, that was a joke.

3. I've never owned a jtag, but with all this reboot and timing information, I am a bit confused on how a console starts up. How quick will the console boot up to the dashboard I have configured (Xell or whatever)? and is the previous jtag faster then this reboot glitch? Does this only have to be done once, and it boots up quick the rest of the time?

4. Other then the way this exploit occurs, is there a difference between a jtag console and a reboot glitch console? And if possible, can you also compare them to the previous Xbox 1 console's Xecuter chips? In the long run, do we all basically get the same stuff?

5. Other then the NAND-X and some easy tool to be released mentioned by Uber, will I need any more tools?

I've been soldering ever since Xecuter was out there for the original Xbox and my first solder test was an Xecuter 2.6 :) Since then I've only been flashing consoles, so I've only got the latest probe, CK3 Pro Rev 4, USB pro, and diligently waiting on the arrival of the CK3-CP. I want my slim to be the same as the old Xbox 1 with emulators and XBMC. Those were the good ol' days!
Click to expand...
3. Boot time is a little random. With the timing exploit it apparently takes 5 seconds for an attempt which only has a 25% success rate and then it tries again. So it basically does it over and over until it finally boots. In the info provided they said it should boot in 30 seconds maybe more maybe less. This is done on every boot attempt. The original jtag is a faster boot as opposed to the new method, but it's not that long of a wait. 4. There is a difference because of current homebrew applications. To launch games etc you will need a rebooter(Search XBRebooter or Freeboot) One currently does not exist for the glitch yet, this glitch simply made way for the ability to run unsigned code. All of these kinds of apps will be/are in the works, but not yet released. As of right now this doesn't do "normal" people any good, give it a few weeks. 5. Nand-x and "CoolRunner" and some soldering equipment should be all you need according to team-x (See: http://www.team-xecuter.com/forums/showthread.php?t=69758)

---------- Post added at 14:21 ---------- Previous post was at 14:20 ----------

3. Boot time is a little random. With the timing exploit it apparently takes 5 seconds for an attempt which only has a 25% success rate and then it tries again. So it basically does it over and over until it finally boots. In the info provided they said it should boot in 30 seconds maybe more maybe less. This is done on every boot attempt. The original jtag is a faster boot as opposed to the new method, but it's not that long of a wait.

4. There is a difference because of current homebrew applications. To launch games etc you will need a rebooter(Search XBRebooter or Freeboot) One currently does not exist for the glitch yet, this glitch simply made way for the ability to run unsigned code. All of these kinds of apps will be/are in the works, but not yet released. As of right now this doesn't do "normal" people any good, give it a few weeks.

5. Nand-x and "CoolRunner" and some soldering equipment should be all you need according to team-x (See: http://www.team-xecuter.com/forums/showthread.php?t=69758)
 
wty4ka

wty4ka

Full Member
Jan 10, 2006
81
0
Coventry, UK
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

is it possible to use the nand-x to program the XC2C64A CoolRunner-II CPLD (aka Digilent C-mod)?
if so is there a disgram anywhere?
 
Ubergeek

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

wty4ka said:
is it possible to use the nand-x to program the XC2C64A CoolRunner-II CPLD (aka Digilent C-mod)?
if so is there a disgram anywhere?
Click to expand...


---------- Post added at 18:07 ---------- Previous post was at 18:07 ----------
Prone13 said:
Why do people ask the same questions that are already answered a few pages back on the same thread? I see why all the mods and wise VIP members get pissed. If you don't have the patience to read the whole thread then more than likely you probably should not make this a hobby.
Click to expand...
I should quote this every day.
 
H

HungrySage

Full Member
Jan 27, 2010
63
0
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

Chickenfloss said:
3. Boot time is a little random. With the timing exploit it apparently takes 5 seconds for an attempt which only has a 25% success rate and then it tries again. So it basically does it over and over until it finally boots. In the info provided they said it should boot in 30 seconds maybe more maybe less. This is done on every boot attempt. The original jtag is a faster boot as opposed to the new method, but it's not that long of a wait. 4. There is a difference because of current homebrew applications. To launch games etc you will need a rebooter(Search XBRebooter or Freeboot) One currently does not exist for the glitch yet, this glitch simply made way for the ability to run unsigned code. All of these kinds of apps will be/are in the works, but not yet released. As of right now this doesn't do "normal" people any good, give it a few weeks. 5. Nand-x and "CoolRunner" and some soldering equipment should be all you need according to team-x (See: http://www.team-xecuter.com/forums/showthread.php?t=69758)

---------- Post added at 14:21 ---------- Previous post was at 14:20 ----------

3. Boot time is a little random. With the timing exploit it apparently takes 5 seconds for an attempt which only has a 25% success rate and then it tries again. So it basically does it over and over until it finally boots. In the info provided they said it should boot in 30 seconds maybe more maybe less. This is done on every boot attempt. The original jtag is a faster boot as opposed to the new method, but it's not that long of a wait.

4. There is a difference because of current homebrew applications. To launch games etc you will need a rebooter(Search XBRebooter or Freeboot) One currently does not exist for the glitch yet, this glitch simply made way for the ability to run unsigned code. All of these kinds of apps will be/are in the works, but not yet released. As of right now this doesn't do "normal" people any good, give it a few weeks.

5. Nand-x and "CoolRunner" and some soldering equipment should be all you need according to team-x (See: http://www.team-xecuter.com/forums/showthread.php?t=69758)
Click to expand...
Thanks for the reply, now I understand exactly what is meant by the resetting until it works (25%). I'm a very impatient guy which is why approx 30 seconds sounds very scary, but hey its a good start.

And for the difference in the applications, the team has to basically make everything again for this platform of modding. I'm hoping the applications on this "platform" of mod would be a much more greater success in the near future then the jtag mod dashes and apps and such.

For the last part, I gotta get an NAND-X and a really coolrunner and maybe the new thing Uber is talking about.

In the end, I am very excited for this whole new world that will open up. The tables have finally turned. No more of that RROD jtags, lets get those slims on the road :cool2:
 
C

crono1000

Full Member
Jan 24, 2011
92
0
MA, USA
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

elitescouter said:
I knew it! This is why I saved my 38 keyless consoles! In your face M$. You might be smart but there will always be someone smarter. Grats to the team that made this happen. Can't wait to add another TX product into my collection!
Click to expand...
Why the hell do you have 38 keyless consoles!?!?! If your modding, shouldn't you save those things? haha
- just saying :D
 
lodown

lodown

BANNED
Jun 21, 2011
6
0
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

is there nemore info on falcon boards and their glitch timing been looking but cant find newhere some1 point me n the right direction or should i still be waiting
 
C

chapsrl

Noob Account
Nov 7, 2004
6
0
st johns
Re: Reset Glitch Hack - JTAG All Consoles inc Slims !!!

Will nand-x work with this on a more recent kernel vers? ie: >7371

Thanks

Ubergeek said:
Nand-x you can use yes.

I will have to look into the AVR USB type mods like teensy and minimus - i don't think so though. But its early days...
Click to expand...
 
mackdaddy

mackdaddy

VIP Member
Feb 7, 2011
147
0
Canada
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

apparently the french guy`s at logic sunrise are making a x360glitchip charging 26 euros or what ever wonder what tx is calling there`s and how much :D
 
Ubergeek

Ubergeek

Xecuter Groupie
Feb 24, 2003
6,259
0
California, USA
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

50 odd posts ? are you taking the piss ?

How about the standalone topic entitled " Xecuter CoolRunner - *New Nand-X Addon* "

You know....The one that i linked you to.

Stick to the rules and dont be a lazy f**ker next time - i.e. search and read before posting ;)
 
mackdaddy

mackdaddy

VIP Member
Feb 7, 2011
147
0
Canada
Re: Reset Glitch Hack - "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

Ya i tend to get lazy after coming home from work and hearing the wife nag at me :rolleyes2:
 
You must log in or register to reply here.