RESISTOR HELP PLZ

[XxGLITCH3RSxX]

hi could not take a picture of it. it was to small a point could not see it but were the white wire is solded that is the resistor that i removed when i slip would this stop the console from booting


Hi i was installing a souns 360 it would not boot fault sonus 360 i desolded the sonus wires and sliped and took the resistor of next to the eject it still wont boot was wondering if it was the resistor that was stoping it to boot or something eles and if the resistor matters can i fix it i can solder i make jtags rghs all the time (demons) just i sliped wondering if i can fix it thanks

 

[Utmad]

You need to post pictures of the damage so people can try and help

 

[XxGLITCH3RSxX]

You need to post pictures of the damage so people can try and help

will do thanks

 

[unleashed1982]

would it not have made more sense to have soldered the resistor back on, check if it works, if not,then come here and start a thread for help.

 

[XxGLITCH3RSxX]

would it not have made more sense to have soldered the resistor back on, check if it works, if not,then come here and start a thread for help.

well i would of if it never got stuck on the soldering iron i burnt it out so i dont think that is possible but thanks anyway

 

[XxGLITCH3RSxX]

would it not have made more sense to have soldered the resistor back on, check if it works, if not,then come here and start a thread for help.

plus it was not booting with the resistor on

 

[oO Elite Oo]

no picture no help we are not predictors here, provide picture.

 

[XxGLITCH3RSxX]

You need to post pictures of the damage so people can try and help

hey added pic

- - - Updated - - -

no picture no help we are not predictors here, provide picture.

added pic

 

[XxGLITCH3RSxX]

You need to post pictures of the damage so people can try and help

added picture

 

[hersheys247]

hey added pic

- - - Updated - - -


added pic

added picture

Where.!!??

Sent from my Brain Tumor causing device using Tapatalk 2

 

[BL4K3Y]

OP: If I'm understanding your post correctly, you lifted that resistor indicated in the image?

 

[XxGLITCH3RSxX]

OP: If I'm understanding your post correctly, you lifted that resistor indicated in the image?

yes would that stop the console booting

- - - Updated - - -

on the post but here

 

[Martin C]

Where's the image from YOUR console?

 

[BL4K3Y]

It appears to be a 10K resistor.

Have you done ANYTHING else other than attempt to install the Sonus?

 

[XxGLITCH3RSxX]

It appears to be a 10K resistor.

Have you done ANYTHING else other than attempt to install the Sonus?

its a rgh i made the console but other than that just the sonus 360

 

[BL4K3Y]

its a rgh i made the console but other than that just the sonus 360

It sounds like you're not telling us the full story.

Post an image showing the damage to your own console and post an image of the STBY_CLK area too.

 

[XxGLITCH3RSxX]

could not take a picture of it. it was to small a point could not see it but were the white wire is solded that is the resistor that i removed when i slip would this stop the console from booting

 

[Martin C]

could not take a picture of it. it was to small a point could not see it but were the white wire is solded that is the resistor that i removed when i slip would this stop the console from booting

I don't see how anyone can help you then. You could get the wrong advice completely. I'm certainly not comfortable in advising anything without seeing what you've done.

 

[XxGLITCH3RSxX]

well when i first made the console i tried a demon install this was a couple of month ago i installed the demon that stop the console booting so i desolded the demon console worked fine i looked in to it turn out to be a faulty demon i never tried to install a nother demon on the console i just tried the sonus 360 installed the yellow white red and black i had to solder the red to the 3.3v next to the coolrunner red wire thats it really

 

[XxGLITCH3RSxX]

i sliped a removed that resistor pointed out on that picture