GENERAL resistor missing and transistor replaced

[saio00]

is that bcp51? i had it fried and i replaced it whit bcp51
the xbox 360 was having rod but after reflowing and everithing still does error code is 0102 - CPU
did i put the wrong transistor in?

forgot to mention xenon 2006, allso i took a closer look and i think that is missing R8N8 resistor from here



can that be the problem for the rrod? and how do i get a new r8n8?name of the resistor and caracteristics or can i just solder it widowt the element?

 

[GeekHeat]

Its a xenon. Not worth spending 1 sec on it. They are worthless when they have had the rrod

 

[saio00]

Its a xenon. Not worth spending 1 sec on it. They are worthless when they have had the rrod

y its a xenon so what i fixed 2 allready just need the info so i can fix that one too

 

[Running4Hippos]

you can buy new used phats for $20 without cables or controller. dont waste time on something that will break in the future

the thing you circled with the question mark.

try just bridging the two pads and see if it boots.

its going to be a pain in the ass to replace it as they are smd resistors

 

[saio00]

the thing whit the question mark does it say bcp 51 becose i mait have puten the wrong element

and 10x for the path advice but can you tell me the ecact model of the tranzistor so ican get a new one?

 

[Running4Hippos]

the thing whit the question mark does it say bcp 51 becose i mait have puten the wrong element

and 10x for the path advice but can you tell me the ecact model of the tranzistor so ican get a new one?

search bcp51 and it will give you the right one

 

[saio00]

close the tread i have destroyed the motherboard whit the x clamp.....than i jumped on it a few times 10x for the help i will try my luck whit another one.....