FIXED Retail Dash Won't Boot - PLEASE HELP!

skaffle

Noob Account
Feb 17, 2013
7
0
Hello all. First post here although I've been reading these forums for forever. I need some help.

First off. I have a Corona V3 and it is currently equipped with a CR3 Lite and a DemoN. I will warn you that I had the DemoN installed with included QSB but I destroyed the QSB when taking it off because I wanted to check my soldering. Therefore, my install looks a bit....messy.

My dilemma: I cannot get the retail dash to boot. No matter what. I can get the glitched dash to boot with no problems. I cannot, however, get the retail dash to boot. I've tried on the Xbox NAND as well as the DemoN NAND (with the CR un-hooked) -NO GO..:frown:

I've also tried different dash versions and compiling a dash from scratch with the files from ECC.

I know how you all are about pictures so I will be posting some immediately following (as soon as I figure out how to do it.) and I'm going to warn you...it's a bit messy. HINT: it's a DemoN wire install. ;)

I'm at my wit's end so someone please help me. I think I've included everything. I apologize if I forgot anything. I think I've covered all the basis.

J-Runner log (when try flashing to my xbox nand):
===================================================
Thursday, August 29, 2013 11:22:37 PM


J-Runner v0.2 Beta (290) Started






Checking Files
Finished Checking Files
Initializing nanddump1.bin..
CpuKey is Correct
Key already Exists
Corona
Nand Initialization Finished
Load Files Initiliazation Finished
16203
Started Creation of the 16203 xebuild image
KV Info saved to file
---------------------------------------------------------------
xeBuild v1.07.561
---------------------------------------------------------------
building retail image
---------------------------------------------------------------
C:\Users\Skaffle\Documents\WHO HACKS THE XBOX - AUSTIN HACKS THE XBOX\J-Runner v02 Beta (287) Core Pack\J-Runner v02 Beta (287) Core Pack\034630523943\updflash.bin image built, info:
---------------------------------------------------------------
Console : Corona
NAND size : 16MiB
Build : Retail
Serial : 034630523943
ConsoleId : 497809095461
MoboSerial: 7501216122352395
Mfg Date : 09/23/2012
CPU Key : AF92F0192C30F2AC155544000000000A
1BL Key : DD88AD0C9ED669E000000000000000FA
DVD Key : F6476E202317796413CCD10000000000
CF LDV : 2
KV type : type2 (hashed)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Saved to C:\Users\Skaffle\Documents\WHO HACKS THE XBOX - AUSTIN HACKS THE XBOX\J-Runner v02 Beta (287) Core Pack\J-Runner v02 Beta (287) Core Pack\034630523943
Image is Ready
Current: XBOX
Switching to DemoN
Success
Current: DemoN
Switching to XBOX
Success
XBOX360
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Invalid Blocks : 0x48
Writing Nand
Done!
in 0:32 min:sec


I've looked very closely at each and every solder point. Even though it looks sloppy I'm fairly certain there are no problems. (of course what do i know)


- - - Updated - - -

Again, working on pictures now. Apparently Chrome won't let me upload them. Trying a different browser :confused:
 

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
The stock NAND needs to be on the 360 and RGH on the DemoN.

The CR ribbon needs to be connected to the DemoN and a 'Demon enabled' Timing file needs to be written to the CR.

If you can confirm all of this, we can go from there.
 
  • Like
Reactions: skaffle

skaffle

Noob Account
Feb 17, 2013
7
0
The stock NAND needs to be on the 360 and RGH on the DemoN.

The CR ribbon needs to be connected to the DemoN and a 'Demon enabled' Timing file needs to be written to the CR.

If you can confirm all of this, we can go from there.
All of this is confirmed. Also. When trying to boot to stock my "power button" light is green for about 30 seconds and then changes to red
 

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
could this be an LDV mismatch problem?
 
  • Like
Reactions: skaffle

skaffle

Noob Account
Feb 17, 2013
7
0
Very likely - good shout!
OP - you know you can't just choose ANY retail dash, right?
Read my LDV sticky.
I was actually wondering about that but I'm not all that familiar with LDVs. I will certainly look into your LDV sticky.
 

skaffle

Noob Account
Feb 17, 2013
7
0
Very likely - good shout!

OP - you know you can't just choose ANY retail dash, right?
Read my LDV sticky.
Martin, I just want you to know that I'm about to buy a plane ticket to Scotland just so I can give you a (manly) kiss. Your LDV post saved the day and my Xbox!

Simply problem, simple solution.

Thanks again. Also, Scrufdog, many thanks to you too!
 
  • Like
Reactions: Martin C

xzanox

VIP Member
Nov 1, 2011
905
48
Netherlands, 1336
Martin, I just want you to know that I'm about to buy a plane ticket to Scotland just so I can give you a (manly) kiss. !
Save the money on the plane ticket, better buy me a new xbox one, i think Martin will be more happy with that money spend than the kiss you will bring him otherwise...
 

Scrufdog

VIP Member
Jun 12, 2011
374
0
Baltimore, MD
Glad we could help. Enjoy.
 
  • Like
Reactions: Martin C