Retail Nand Wont Boot after Last Update

[junivelli]

Hi
i would like to know if someone can help me out with a dual nand on corona v1 issue,the console boots on the hacked nand fine however when i boot on the retail nand the green light on the CR lite make a lousy noise and stay green longer than usual,then turn off and you can still hear the noise, and i cant turn off the xbox i have to use j runner or pull the power cable out, and all this happened after i did the last update 15574 to 16197 ( xbox live update) however if i turn off the 1 and 5 on S2 the coolrunner it boots fine on the retail nand,i tried a couple of things like to make a retail nand using j-runner, i redo my soldering on the demon, put the coolrunner to "phat"

here some pics and videos

video 1 is when i used to boot on the retail nand on 15574 dashboard
[ame="http://www.youtube.com/watch?v=W9F6v8LgcDg"]Boot on retail - YouTube[/ame]

video 2 is what happened after the update 16197
[ame="http://www.youtube.com/watch?v=HsgtIJcsBeU"]After 16197 update - YouTube[/ame]

video 3 is when i turn off the console with j-runner
[ame="http://www.youtube.com/watch?v=gWOUmlZe6Sg"]Stay green after turn off - YouTube[/ame]

Pics :
https://www.dropbox.com/s/yokftdrwt1phuoq/Photo 2012-11-10 6 01 57 AM.jpg

https://www.dropbox.com/s/6mjmokffbgwj6zh/Photo 2012-11-10 6 02 05 AM.jpg

https://www.dropbox.com/s/k8tbmsv3tvslymy/Photo 2012-11-10 6 02 17 AM.jpg

 

[LoneWolf913]

You're not using Demon-enabled timing files if it's trying to glitch on the retail nand like that. Check your PMs in a minute, I'm going to send you a set of timing files to try out. Program them via Demon Toolbox or J-Runner's advanced functions menu.

 

[junivelli]

thanks, but i did checked the "DemoN install" option when i flashed the coolrunner, thnks for the files i will keep you posted

 

[Martin C]

The Demon enabled Corona files are not available yet, so ticking the box wouldn't have done anything. Try what LoneWolf has sent you.

While we're at it, WTF's the deal with that demon install?

 

[junivelli]

You're not using Demon-enabled timing files if it's trying to glitch on the retail nand like that. Check your PMs in a minute, I'm going to send you a set of timing files to try out. Program them via Demon Toolbox or J-Runner's advanced functions menu.

Thanks
it works, i used the 21863_2.xsvf, now i can boot on both dashboard just fine

The Demon enabled Corona files are not available yet, so ticking the box wouldn't have done anything. Try what LoneWolf has sent you.

While we're at it, WTF's the deal with that demon install?

i had a hard time removing the Demon from another xbox, some pads are broken i had to use the ones on the Demon board and how comes it not available ? software update ?

 

[Martin C]

It's awaiting approval by TX before being made public. I don't have an ETA as yet.

 

[junivelli]

ah okay, thanks for the info