LITEON DG-16D2S Revert back to stock, only CFW I have! need confirmation plz

[b52psi]

Hello,

My Jasper is on LT3.0 and working fine, I want to revert to stock firmware to go XBL, all what I have is my LT3.0 CFW bin, and the rest (dummy, dvd key, etc..) I don't have.
I have CK Blaster and X360USB PRO, and I know how to flash with JF.

When I open my LT3.0 CFW in JF in Open Source Firmware it shows the DVD key, I Save Drive Key, cause I think(99%) this is my DVD key.

Now I want to confirm how to flash to stock firmware,

1-Download OFW orig-02510C-1c000.
2-Open JF(FirmwareTool 32).
3-Open OFW orig-02510C-1c000 in Open Target Firmware.
4-Press Manual spoofing.
5-Press Load Key.bin, and choose my DVD key I had saved before from my Lt3.0 CFW.
6-Then either I save file as my OFW or flash it to my drive.

Is it like this? or something more I should do?

I noticed the lite-on barcode is grayed and can not edit in manual spoofing!!! Beside, the grayed barcode is different than the DVD drive barcode pasted on its shell!!
is that normal? will I be banned on XBL for this reason(different barcode)?

Final note my Jasper failed xval test and I am working on rebuilding nand to be able to go XBL.

Many Thanks

 

[scott1503]

Plug in drive, benq unlock , read firmware , load in orig 4421 firmware (if dash is higher than 13141) , hit spoof , hit flash then outro

 

[b52psi]

Thanks,

But maybe I forgot to mention my drive is Lite-on(Phat Jasper).

 

[scott1503]

Don't know where I got benq from if you download current up to date firmware folder and look for orig 13141 post lite on . Load that and manual spoof key in you should be good to go .

 

[b52psi]

So my Steps typed in blue are right.

What about the barcode(typed in red)? Why it is different? And will I be banned because it is different?
I can't edit it in JF.

Thanks

 

[AllyNerd]

You do know people go on xbl with Lt firmware

 

[scott1503]

So my Steps typed in blue are right.

What about the barcode(typed in red)? Why it is different? And will I be banned because it is different?
I can't edit it in JF.

Thanks

The barcode will be used when manually putting key in and spoofing but yeah it shoul be correct.

And like allynerd people go online with lt3 along with patched backups anyway

 

[b52psi]

Actually I am going to install Demon for dual nand and R-jtag, which i think it is better for me, as I am looking to play safe online plus to play offline through external HDD without any disk to avoid the phat xbox loud noise.

Thanks