FIXED RGH 1 Falcon won't boot after I try to flash latest dashlaunch

[wisemanofhyrule]

TX Product(s) used: One of the older coolrunners (Rev C I believe), I got this rghed by a guy on here a little over two years ago.
Console Type: Falcon (v2)
CB version: 5771

I was updating dashlaunch so as to play some of the newer games using the guide http://www.realmodscene.com/index.php?/topic/413-quick-and-easy-way-to-update-your-jtagrgh/ . I have used it before to update dashlaunch and the dash itself so the tutorial isn't the problem as far as I can tell. I flashed the new nand and shut down the xbox and turned it back on. The power button is green but the wireless controller won't connect and the tv doesn't show anything. Im assuming I messed up the nand. I do not have any of the tools for actually hacking the console so I can't flash the NAND without using the program you actually run on the console.

When the console boots, the CR light stays red and the green debug light flashes for about a third of a second.
Xell does boot, can I do something with that?

xeBuild log: http://pastebin.com/Sw2nfRZS
NAND Flasher log: http://pastebin.com/zvsnuxMa

 

[BL4K3Y]

Build a new image with J-Runner and post the output of updflash.bin.log here please.

Your console has a bad block at 0x18 which needs to be dealt with properly.

 

[wisemanofhyrule]

Created the image with dash version 16747, log is here: http://pastebin.com/UCYcpPBp .

 

[BL4K3Y]

The log looks fine to me:

***** WARNING: nanddump.bin has a bad LBA at block 0x18 (raw offset 0x63000), block LBA ignored
copying nanddump data from block 0x3ff to block 0x18 for file extraction integrity
block 0x18 was remapped to block 0x3ff, entering remap instance 1
done!
cleaning up stray remaps
done!
--remap summary--
0: source: 0x0018 dest: 0x03ff

That image should be good to write to your console now.

 

[wisemanofhyrule]

Flashed it using rawflash for xell and it works perfectly. Thanks!

 

[BL4K3Y]

Flashed it using rawflash for xell and it works perfectly. Thanks!

No problem and you are welcome !