RGH RGH 12v Fan Question

[Road-Runner]

Ohk i have an Zypher RGH and when i turn it on the fan is real loud witch means its a 12v fan but i looked and their are no wires and its a normal fan so i look at the cd that came with the rgh about the nand and cpu key but their are to files called

1.ggBuild 13604 100% Fan NAND.bin
and
2.ggBuild 13604 Normal Fan NAND.bin

Soo im wanting to make the fan back to 5v so it isnt always on 12v and i can controller it in FSD but i dont know what to do so can anybody give me an tut on how to do it...

 

[Martin C]

Just use the original NAND dump and CPU key in J-Runner. It'll build a standard RGH for you without 100% fan settings.

 

[mrdrifta]

Ohk i have an Zypher RGH and when i turn it on the fan is real loud witch means its a 12v fan but i looked and their are no wires and its a normal fan so i look at the cd that came with the rgh about the nand and cpu key but their are to files called

1.ggBuild 13604 100% Fan NAND.bin
and
2.ggBuild 13604 Normal Fan NAND.bin

Soo im wanting to make the fan back to 5v so it isnt always on 12v and i can controller it in FSD but i dont know what to do so can anybody give me an tut on how to do it...

Download RawFlash v4 HERE

Extract the zip file and you should get a file called xenon.elf

put the ggBuild 13604 Normal Fan NAND.bin and the xenon.elf files on a FAT32-FORMATTED usb stick

Then insert into the xbox360 while its turned off.

Turn the xbox on using the eject button.

It will load xell, which will load Raw Flash. Then Raw Flash will load the 13604 normal fan nand.bin file.

That will return your fan speed to normal.

 

[Road-Runner]

thanks, im going to try it now...

---------- Post added at 08:19 ---------- Previous post was at 08:11 ----------

ohk i just tried it and it loads it but the it says

*trying to make sence of uda, let's assume it's fat

what does that mean

 

[Wretched]

I use multibuild and edit the ini file to change the average and max temps. This will keep it as cool as you want without having to tinker with the fan settings on FSD.

Also just a heads up with a Zypher you will probably be close to 100% fan to keep it cool.

 

[Road-Runner]

ohk well can you teamview me and help me out please..

 

[Wretched]

thanks, im going to try it now...

---------- Post added at 08:19 ---------- Previous post was at 08:11 ----------

ohk i just tried it and it loads it but the it says

*trying to make sence of uda, let's assume it's fat

what does that mean

I dont know what that means, but I think it comes up with every flash I have done and all work fine.

 

[Road-Runner]

yes i know it work but the fan is still the same... ill post a video realfast of me doing it.

 

[WNYConsoles]

I use 360 Flash Tool to change fan speeds myself, it makes it easier.

 

[Road-Runner]

[ame="http://youtu.be/6WGKSF1Of1I"]http://youtu.be/6WGKSF1Of1I[/ame]

 

[Wretched]

sent a pm.

WNYconsoles, I don't know why I didn't think of just using 360 flash.

---------- Post added at 10:14 ---------- Previous post was at 10:05 ----------

Right beside the fan connector is there a small resistor that is bridged? The 12v fan mod can be done like this or could even be on the bottom of the motherboard.

Did you take the xbox out of the case and look ? or just looed for wires in that window?

---------- Post added at 10:23 ---------- Previous post was at 10:14 ----------

http://forums.xbox-scene.com/index.php?showtopic=637955

 

[Martin C]

http://youtu.be/6WGKSF1Of1I

You haven't renamed the NAND file. It needs to be called nandflash.bin.

 

[mrdrifta]

You haven't renamed the NAND file. It needs to be called nandflash.bin.

Sorry road-runner, that was my fault. I initially wrote that post in a way that was hard to understand and rewrote it, not knowing i had deleted the renaming part.

Heres the revised steps:

Download RawFlash v4 HERE

Extract the zip file and you should get a file called xenon.elf

put the ggBuild 13604 Normal Fan NAND.bin and the xenon.elf files on a FAT32-FORMATTED usb stick

Rename ggBuild 13604 Normal Fan NAND.bin to nandflash.bin

Then insert into the xbox360 while its turned off.

Turn the xbox on using the eject button.

It will load xell, which will load Raw Flash. Then Raw Flash will load the 13604 normal fan nand.bin file.

That will return your fan speed to normal.

That "*trying to make sence of uda, let's assume it's fat" message meant that it mounted the flashdrive, but couldn't continue because it could find the file nandflash.bin that it was looking for.

Hope you get it sorted mate.