Hey Guys,
Edit: Problem solved
So I have attempted 4 times to do an RGH 2.0 (4 different consoles) (this is the 4th time) 2 of them are working fine but this one is....
This is what happened:
1. Read the Nand (4 matching dumps)
2. Created ECC
3. Wrote ECC
4. Programmed Coolrunner (switch on "PRG") with Trinity timing file.
5. Placed Coolrunner.
6. Installed All Wires.
7. Coolrunner switch on "NOR" & "SLIM".
8. Console booted in 2 glitches.
9. Took picture of CPU & DVD Keys
10. Generated Hacked Image and wrote it to Nand.
11. Console booted almost instantly
12. Launched FSD
13. Tested the boot a few times
14. Played a game for over an hour.
15. Turned the console off next day everything worked fine
16. Put everything back together
17. Booted Console played a game
18. Turned console off waited 60 seconds and rebooted
19. Red Dot error code 0010
20. Turned it off waited 20mins and it worked again. After that I turned off the console booted it back up and red dot again. Waited 5 mins turned it on worked again. And this goes on and on.
Error Details: When having red dot fan doesn't spin up. PSU light is orange. Coolrunner Rev C Not glitching. Problem Occurs when Trinity is turned on for 5 min plus.
Video: Currently Uploading
Template:
TX Product(s) used: Nand-X (Boss), Coolrunner Rev C
Console Type: Trinity
Dashboard version: e.g 2.0.16747
CB version: See Image: http://bit.ly/1nwlYtg
Screenshot of NAND details from J-Runner:
http://bit.ly/1nwlYtg
Images of close-up soldering to motherboard:
3v3, F & E: http://imgur.com/EpMlvWJ
B: http://imgur.com/NLpJ8T4
D: http://imgur.com/yxXwqnD & http://imgur.com/PSqlqpF
C: http://imgur.com/k5pjY8J
Ground: http://imgur.com/wSMuSrK
Description of problem: If I leave my console on for 5 mins or longer, turn it off and turn it on again it gives me 0010. Have to wait 5-10 minutes, and it works again.
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y
How long is the light on for each time: 5 seconds or so
Please Help Me On This One, if there is any information missing tell me!
Thanks
Edit: Problem solved
So I have attempted 4 times to do an RGH 2.0 (4 different consoles) (this is the 4th time) 2 of them are working fine but this one is....
This is what happened:
1. Read the Nand (4 matching dumps)
2. Created ECC
3. Wrote ECC
4. Programmed Coolrunner (switch on "PRG") with Trinity timing file.
5. Placed Coolrunner.
6. Installed All Wires.
7. Coolrunner switch on "NOR" & "SLIM".
8. Console booted in 2 glitches.
9. Took picture of CPU & DVD Keys
10. Generated Hacked Image and wrote it to Nand.
11. Console booted almost instantly
12. Launched FSD
13. Tested the boot a few times
14. Played a game for over an hour.
15. Turned the console off next day everything worked fine
16. Put everything back together
17. Booted Console played a game
18. Turned console off waited 60 seconds and rebooted
19. Red Dot error code 0010
20. Turned it off waited 20mins and it worked again. After that I turned off the console booted it back up and red dot again. Waited 5 mins turned it on worked again. And this goes on and on.
Error Details: When having red dot fan doesn't spin up. PSU light is orange. Coolrunner Rev C Not glitching. Problem Occurs when Trinity is turned on for 5 min plus.
Video: Currently Uploading
Template:
TX Product(s) used: Nand-X (Boss), Coolrunner Rev C
Console Type: Trinity
Dashboard version: e.g 2.0.16747
CB version: See Image: http://bit.ly/1nwlYtg
Screenshot of NAND details from J-Runner:
http://bit.ly/1nwlYtg
Images of close-up soldering to motherboard:
3v3, F & E: http://imgur.com/EpMlvWJ
B: http://imgur.com/NLpJ8T4
D: http://imgur.com/yxXwqnD & http://imgur.com/PSqlqpF
C: http://imgur.com/k5pjY8J
Ground: http://imgur.com/wSMuSrK
Description of problem: If I leave my console on for 5 mins or longer, turn it off and turn it on again it gives me 0010. Have to wait 5-10 minutes, and it works again.
Was the console working before you started: Y
Do you get a green debug light appear on the RGH chip every 4-5 seconds: Y
How long is the light on for each time: 5 seconds or so
Please Help Me On This One, if there is any information missing tell me!
Thanks
Last edited: