rgh 2 for jasper 512 MB ECC files

[stanleycup]

Hello there , i always do slim consoles with the CR4 XL without issues but i have a Jasper 512 MB here and i have an issue

In J-Runner running as Adminstritator : im using NAND-X , dumped nand twice , gave me 64 MB nands , compared them and they are both the same
Since im using RGH2 with the CR4 i chose on J-Runner menu : Advance/Custom Nand - CR Functions / Write 512 and chose the ECC Jasper cr4 file / Run
it flashed the ECC
then i press power to get cpu key in j-runner using an Ethernet cable, but when i press Power or Eject , the console doesnt respond at all
tried the same steps but choosing 64 instead of 512 in Advance/Custom Nand - CR Funchtions , still a no go
then i simply tried Create ECC/Writing ECC and then i get power and the CR4 starts flashing green but no glitch ( i presume its because its not using cr4 ecc by default )
anyways any input right now would be appreciated

thanks guys

 

[nofeloniesyet]

Hello there , i always do slim consoles with the CR4 XL without issues but i have a Jasper 512 MB here and i have an issue

In J-Runner running as Adminstritator : im using NAND-X , dumped nand twice , gave me 64 MB nands , compared them and they are both the same
Since im using RGH2 with the CR4 i chose on J-Runner menu : Advance/Custom Nand - CR Functions / Write 512 and chose the ECC Jasper cr4 file / Run
it flashed the ECC
then i press power to get cpu key in j-runner using an Ethernet cable, but when i press Power or Eject , the console doesnt respond at all
tried the same steps but choosing 64 instead of 512 in Advance/Custom Nand - CR Funchtions , still a no go
then i simply tried Create ECC/Writing ECC and then i get power and the CR4 starts flashing green but no glitch ( i presume its because its not using cr4 ecc by default )
anyways any input right now would be appreciated

thanks guys

you dont have to manually load the cr4 smc anymore,just tick cr4 in top right before creating smc and thats all ya gotta do besides write it.

 

[stanleycup]

you dont have to manually load the cr4 smc anymore,just tick cr4 in top right before creating smc and thats all ya gotta do besides write it.

Hello thanks for the quick response , so i just clicked glitch 2 cr 4 on the right corner , created the ecc , wrote the ecc , booted the console , see the cr4 green light blinking but now 10 minutes not glitch , 123567 up , and 4 and 8 down on dip swich , on phat settings 0 ohms jumper , no glitch

 

[nofeloniesyet]

not always does default dip settings work,you have 16 diff combos of dips to try on the install guide for phat rgh2+,try em all.

 

[GeekHeat]

Hello thanks for the quick response , so i just clicked glitch 2 cr 4 on the right corner , created the ecc , wrote the ecc , booted the console , see the cr4 green light blinking but now 10 minutes not glitch , 123567 up , and 4 and 8 down on dip swich , on phat settings 0 ohms jumper , no glitch

go thru all the dip settings
nofel beat me to it.

 

[stanleycup]

in my ECC folder i have Jasper.ecc and a jasper_cr4.ecc files , is this correct , cause in this thread http://team-xecuter.com/forums/threads/147878-Xecuter-CR4-XL-Magic-SMC-Files-for-RGH2 it says to download the magic files and to look for RGH2_ECC folder , i dont have a rgh2_ecc folder , i just have a regular folder called ECC and the Jasper_cr4.ecc files is in it , before trying to switch the dips through 15 combinations , the jasper_cr4.ecc in my folder ECC is that the one im suppose to use for this console with cr4 rgh2 wirging settings thanks

 

[Nintendo]

in my ECC folder i have Jasper.ecc and a jasper_cr4.ecc files , is this correct , cause in this thread http://team-xecuter.com/forums/threads/147878-Xecuter-CR4-XL-Magic-SMC-Files-for-RGH2 it says to download the magic files and to look for RGH2_ECC folder , i dont have a rgh2_ecc folder , i just have a regular folder called ECC and the Jasper_cr4.ecc files is in it , before trying to switch the dips through 15 combinations , the jasper_cr4.ecc in my folder ECC is that the one im suppose to use for this console with cr4 rgh2 wirging settings thanks

Yeah use Jasper_cr4.ecc

 

[nofeloniesyet]

that thread was before the cr4 smc option was added to jrunner bro,done told ya u do not have to manually load the cr4 smc anymore,just tick cr4 in jrunner,thats it!

 

[stanleycup]

after trying the 15 combinations i had no success with this stubborn Jasper 512 MB , since i played with this console for more than 3-4 hours , ill let the customer know to bring a slim console instead , takes 1 hour to do and it boots instantly , so long phat consoles , i dont have time for this , cr4 is nice for slims and thats about the size of it

 

[nofeloniesyet]

after trying the 15 combinations i had no success with this stubborn Jasper 512 MB , since i played with this console for more than 3-4 hours , ill let the customer know to bring a slim console instead , takes 1 hour to do and it boots instantly , so long phat consoles , i dont have time for this , cr4 is nice for slims and thats about the size of it

cr4 works fine on allll consoles.

 

[stanleycup]

not on this one buddy

 

[nofeloniesyet]

not on this one buddy

send it here,ill show ya it will.

 

[stanleycup]

its fine , thanks for the help anyways , ill stick to slim consoles , no biggy