RGH rgh 2 jasper madness
- Thread starter console repair world
- Start date
it could be that, but they are just dashlaunch files,
they shouldn't really make any difference,
I dont know if this is going to help but here are screenshots of 360flash dump tool with both nands.
first is the original dump, 2nd is the glitch image
first is the original dump, 2nd is the glitch image
Last edited:
jsinger47
Troll Eating Dogs
just so you guys know, if you read more than the NAND on a Jasper (meaning -r512 a 256 or 16mb jasper), i believe you start reading the RAM
so you end up with more than what you should have, which typically isn't a good thing
so you end up with more than what you should have, which typically isn't a good thing
all my images were made using the 16 dump as i couldnt make an image out of the 64, but ta joe thats good to know
- Mar 1, 2010
- 3,346
- 128
Try being patient.
A couple of us were trying tweaked cb's last night - people are aware and it is being worked on.
If/When it's sorted, someone will post here. No-one is going to suddenly get it working and not tell you.
If you need your RGH2.0 now I suggest you buy another console that can be done.
I've spent 4 days on this, used every alt point, the console is now not able to be resold in the condition it's in.
Asking every day if its fixed, is not going to fix the issue at hand.
A couple of us were trying tweaked cb's last night - people are aware and it is being worked on.
If/When it's sorted, someone will post here. No-one is going to suddenly get it working and not tell you.
If you need your RGH2.0 now I suggest you buy another console that can be done.
I've spent 4 days on this, used every alt point, the console is now not able to be resold in the condition it's in.
Asking every day if its fixed, is not going to fix the issue at hand.
I've not managed anything yet,
I also have a zephyr here on 14719 that wont glitch with rgh2.0
I created .ecc with python and the cr led flashes 6 times then stops, (with every timing file) like it's glitched but no rol appears and no output on screen,
then when I power it off and back on with the rol power button the coolrunner doesn't even flash, however if I turn it off at the wall socket then back on, it flashes another 6 times and it's the same all over again.
I flashed back to stock and it boots right up.
I also have a zephyr here on 14719 that wont glitch with rgh2.0
I created .ecc with python and the cr led flashes 6 times then stops, (with every timing file) like it's glitched but no rol appears and no output on screen,
then when I power it off and back on with the rol power button the coolrunner doesn't even flash, however if I turn it off at the wall socket then back on, it flashes another 6 times and it's the same all over again.
I flashed back to stock and it boots right up.
trippy86
VIP Member
im now in the same boat as everyone, 3 japsers exactly the same, tried everything mentioned and will only boot xell. multibuilder makes no diff
Ticallion
BANNED
Looks like I'm joining the ranks, have a 512mb Jasper with 6753 cb that boots its .ecc fine, but when flashing image back no boot into either Xell or Dashboard, when before would boot into Xell in 30 secs or less.
Tried A and D timing files so far, no change, will leave it for tonight and hopefully the issue will be pinpointed and resolved before long.
Tried A and D timing files so far, no change, will leave it for tonight and hopefully the issue will be pinpointed and resolved before long.
bernzburnz
BANNED
- Mar 1, 2010
- 3,346
- 128
Ubergeek
Xecuter Groupie
It's in hand. Had to get some Jasper's to a couple of the guys
In my case it happened in 100% of cases. I tried 1000 different things and no dashboard boot.