ok so i booted into xell fine got cup key and created a glitched image. then i powered down console and placed nandflash.bin and xenon.elf on usb it had a bad black but remaped it. once it completed i powered down the console and unpluged it for 30 seconds and now it wont boot into xell or the dash.
Goldensavage
VIP Member
Use multibuilder .7. And use command,prompt.
It is more reliable
Never had any issues with it.
Or put original. Nand back on and see if it boots
It is more reliable
Never had any issues with it.
Or put original. Nand back on and see if it boots
Last edited:
when i put the original nand back on to see if it boots should i switch the coolrunner to program so it nit tring to glitch my console?
Goldensavage
VIP Member
You should have read only the first 64 of the Nand.
Originally Nandpro USB: -r64 "Nand.bin" (or whatever you called it)
What size nand did you read.
If it's the standard size you dumped. It should be
Nandpro USB: +W64 "Insert name of .bin"
You can put the coolrunner on Program, which should by pass it. Or just desolder the Power wire to the coolruner board. That's what i do for safety, when i am testing and trouble shooting
---------- Post added at 12:25 ---------- Previous post was at 12:22 ----------
As a side note, can you post pics of your soldering. Perhaps a solder joint has come slightly loose during movement or a joint is dry
Originally Nandpro USB: -r64 "Nand.bin" (or whatever you called it)
What size nand did you read.
If it's the standard size you dumped. It should be
Nandpro USB: +W64 "Insert name of .bin"
You can put the coolrunner on Program, which should by pass it. Or just desolder the Power wire to the coolruner board. That's what i do for safety, when i am testing and trouble shooting
---------- Post added at 12:25 ---------- Previous post was at 12:22 ----------
As a side note, can you post pics of your soldering. Perhaps a solder joint has come slightly loose during movement or a joint is dry
Last edited:
cool thanks a bunch. i love getting a vip awnswer they never do me wrong. and just figured out it does boot, just slow booting. i need to install the cap. 68. i have one just not put it on yet will now though. and i did make the 64 bit size and just in case i made a few full dumps.
---------- Post added at 05:48 ---------- Previous post was at 05:42 ----------
also it booted up faster in xell with no cap. once i installed the hacked dash it took longer to boot. way longer. but that god a 68. cap answers my next question i would have had on how to speed up the boot time.
---------- Post added at 05:48 ---------- Previous post was at 05:42 ----------
also it booted up faster in xell with no cap. once i installed the hacked dash it took longer to boot. way longer. but that god a 68. cap answers my next question i would have had on how to speed up the boot time.
Goldensavage
VIP Member
Nice to see your getting there.
At least you'll remember everything for next time.
to speed boot times, just try to re-align the wires slightly. can help sometimes.
At least you'll remember everything for next time.
to speed boot times, just try to re-align the wires slightly. can help sometimes.
As soon as i barrow a camra with good resolution i will post some pics so i can get some feed back anyway.