RGH RGH CORONA V4 J-RUNNER'' HEADER IS WRONG '' AND NO NAND INFO...PLEASE HELP

Y

YONDAN

Full Member
Dec 5, 2011
38
0
MONTEREY PARK,CALIFORNIA
Can some one please help me.My first attempt to RGH my console,I have a corona v4,with TX Corona 4GB NAND RW KIT V4 and DGX V1.0S and CPU Postfix Adapter and J-R Programmer V2 and QSB V3 Monitor/Comms USB Cable.So far all I have done is soldier on the tx corona 4gb nand rw kit to mainboard. Inserted the little corona 4gb ext into card reader and it asked me to format before use so I said yes and formatted...Im not sure if this was the right or wrong thing to do? j-runner says nands are the same but Header is wrong and I don't see any nand info ??I have not soldiered on the DGX v1.0s or cpu postfix adapter yet nor have I connected the J-R programmer v2 yet.I have read and read and searched going on two weeks now for the answers on this site but there is so much stuff/information that its a bit overwhelming .I tried to take pictures but my camera stinks,can someone please help me with this wrong header and no nand info displayed issue please.im not even sure if nand info should be displayed yet with just the corona rw kit installed but Im pretty sure I should see nand info displayed at this point?
J-Runner v0.2 Beta (288) Started
Checking Files
Finished Checking Files
I:\
Reading from \ to C:\Users\DAVID\Downloads\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Done!
in 0:04 min:sec
I:\
Reading from I:\ to C:\Users\DAVID\Downloads\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Done!
in 0:05 min:sec
Initializing nanddump1.bin..
Comparing...
Header is wrong..
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
Initializing nanddump1.bin..
Header is wrong..
===================================================
Sunday, April 28, 2013 11:18:32 AM
J-Runner v0.2 Beta (288) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Checking Files
Finished Checking Files
===================================================
Sunday, April 28, 2013 11:19:18 AM
J-Runner v0.2 Beta (288) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Checking Files
Finished Checking Files
===================================================
Sunday, April 28, 2013 11:19:50 AM
J-Runner v0.2 Beta (288) Started

WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Checking Files
Finished Checking Files
I:\
Reading from I:\ to C:\Users\DAVID\Downloads\J-Runner v02 Beta (288) Core Pack\output\nanddump1.bin
Done!
in 0:04 min:sec
I:\
Reading from I:\ to C:\Users\DAVID\Downloads\J-Runner v02 Beta (288) Core Pack\output\nanddump2.bin
Done!
in 0:04 min:sec
Comparing...
Initializing nanddump1.bin..
Header is wrong..
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
Initializing nanddump1.bin..
Header is wrong..
===========================
 
X

XGO PARADOX

Full Member
May 19, 2012
93
0
California USA
YONDAN said:
Inserted the little corona 4gb ext into card reader and it asked me to format before use so I said yes and formatted...Im not sure if this was the right or wrong thing to do?
===========================
Click to expand...
you just deleted your entire console's programming... build a .ecc and flash it to the console, find your CPU key and build a glitch image. The console will have to remain hacked as you lost it's NAND dump.
 
  • Like
Reactions: YONDAN
Y

YONDAN

Full Member
Dec 5, 2011
38
0
MONTEREY PARK,CALIFORNIA
XGO PARADOX said:
you just deleted your entire console's programming... build a .ecc and flash it to the console, find your CPU key and build a glitch image. The console will have to remain hacked as you lost it's NAND dump.
Click to expand...
WOW im in over my head...? Will i need a donor nand ? Okay so ill get key from console with DGX i hope...so j-runner user guide will explain how to build a glitch image ?
 
NMods

NMods

BANNED
Dec 1, 2011
59
0
USA
www.youtube.com
As XGO PARADOX said you might need to write an ecc file to the NAND that is currently on there and boot into xell to get your CPU key, and from there just make an rgh2 image and flash it. The console after that point will have to remain as an RGH. Or you could create a retail NAND in j-runner and flash that and then remove the DGX chip
 
Last edited:
  • Like
Reactions: YONDAN
A

AllyNerd

VIP Member
Feb 25, 2013
1,179
0
Philadelphia
TXTuts said:
As XGO PARADOX said you might need to write an ecc file to the NAND that is currently on there and boot into xell to get your CPU key, and from there just make an rgh2 image and flash it. The console after that point will have to remain as an RGH. Or you could create a retail NAND in j-runner and flash that and then remove the DGX chip
Click to expand...
Cant be retail without original keyvault
 
  • Like
Reactions: YONDAN and NMods
Y

YONDAN

Full Member
Dec 5, 2011
38
0
MONTEREY PARK,CALIFORNIA
just soldiered in dgx v1.0s to get cpu and console wont even turn on...it makes the beep sound but dont turn on ?Can i write an ecc file to the NAND that is currently on there and boot into xell to get your CPU key if console dont turn on..And should the console turn on with out entire console's programming missing ?
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
NMods said:
I forgot to mention as long as he has his original KV.bin
Click to expand...
Read his OP - he formatted his NAND. It's all gone.

YONDAN said:
just soldiered in dgx v1.0s to get cpu and console wont even turn on...it makes the beep sound but dont turn on ?Can i write an ecc file to the NAND that is currently on there and boot into xell to get your CPU key if console dont turn on..And should the console turn on with out entire console's programming missing ?
Click to expand...
You need to write the ECC before it'll turn on.
 
Y

YONDAN

Full Member
Dec 5, 2011
38
0
MONTEREY PARK,CALIFORNIA
no wait should I have soldiered something else onto the board to create this ecc file because right now all I have is the qsb kit and dgx soldiered on the board? should I have the j-r programmer connected to create ecc file...? im sorry that im a complete idiot
 
You must log in or register to reply here.