RGH RGH CORONA V4 J-RUNNER'' HEADER IS WRONG '' AND NO NAND INFO...PLEASE HELP

[saxon1978]

Server is temporary down.
Do you have when you select rgh2 option write ECC*

 

[Martin C]

NiceShot/Tuxuser XeLL 4GB Corona DGX

Open J-Runner.

Open the above ECC as the source file.

Select 'Write ECC'.

 

[YONDAN]

Okay as soon as I get home from work I will try again and report back...thank you

 

[YONDAN]

okay great... console turns on again so now i think the next step is to attempt to get cpu key with dgx ?

 

[BL4K3Y]

so now i think the next step is to attempt to get cpu key with dgx ?

That is correct.

You need to get the CPU key before you can build a glitch image.

 

[YONDAN]

okay trying to get cpu key but dgx is only shows red light no green light..ill double check my soildering if i cant get it to do anything ill post pics

 

[YONDAN]

Can some one please have a look at these cause dgx is not doing anything

 

[BL4K3Y]

Have you got dip switch #8 ON?

 

[Martin C]

So your console has missing resistors but POST_OUT is there. Are you sure about that? Have you checked under the heatsink?

 

[YONDAN]

Yes dip switch #8 is on

 

[Martin C]

So your console has missing resistors but POST_OUT is there. Are you sure about that? Have you checked under the heatsink?

^^^

 

[YONDAN]

this is what I see...I have the cpu postfix adapter,do I put it on ?will it matter?

 

[Martin C]

http://www.hackfaq.net/wp-content/uploads/coronav4_no_wire.png

Which one matches your console?

 

[YONDAN]

the one on the left side

 

[Martin C]

So you need to fit the CPU Postfix adaptor as per instructions.

 

[YONDAN]

okay will do now..thank you

 

[YONDAN]

I put on cpu postfix adapter but im not sure what to connect to it...yellow wire from dgx ?

 

[Martin C]

Since you managed to format your NAND due to not reading, I strongly suggest you stop and look through all the guides and stickys. Everything you need to know about this (and all questions answered) if you take the time to read.

Bear in mind that when you have your CPU key, you will still need a NAND built for your console from Donor files, which I'm assuming you haven't a clue on what to do with that either. Therefore it's even more reason to stop and read.

We will be here to answer any questions you have along the way, but we're not here to hold your hand.

 

[YONDAN]

Okay I did some reading regarding postfix adapter...installed it around cpu than I desoldered yellow wire from behind board and soldered yellow wire to postfix adapter..turned on console and green light on dgx immediately started flashing ever 3 seconds only problem is I cant see anything on my laptop screen..using hdmi cable,I do have usb comms cable but im not sure where to plug it in to use it with j--runner monitor. I thank you for all your help,this site is awesome and I understand how frustrating it must be trying to help people who don't want to help them selfs by reading and studying like myself.I will continue to read and read and try to find the answers for myself...thanks for your patience

 

[Martin C]

The light will stop flashing (on the CR) once it boots to XeLL.