RGH DEMON won't boot?

gamerman56

Junior Member
Aug 6, 2012
10
0
Lansing, Michigan
I had my Dual Nand Working perfectly, both Nands on 17511 when my friend came over and updated the Retail NAND to 17526. Now at first I was able to boot into Xell but not the DEMON NAND, but now after I tried to flash it again with a new hacked NAND, the power button just beeps without turning on. Retail NAND works perfectly so I'm assuming is a bad flash since hardware-wise it's worked perfectly for over a year. My retail NAND when read with J-Runner says:

Reading Nand to E:\Users\Downloads\XBOX\JRunner_V0.5\JRunner_V0.5\output\nanddump1.bin
XBOX360
Hardware : Demon Slim
Firmware : 1.4
Flash ID : 0x73AD Hynix (16MiB - Small block)
Flash Size : 0x400 blocks of 0x4200 bytes
Reading Nand
Done!
in 1:00 min:sec

Reading Nand to E:\Users\Downloads\XBOX\JRunner_V0.5\JRunner_V0.5\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Reading Nand
Done!
in 1:01 min:sec

Reading Nand to E:\Users\Downloads\XBOX\JRunner_V0.5\JRunner_V0.5\output\nanddump3.bin
Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same
Reading Nand
Done!
in 1:00 min:sec

Reading Nand to E:\Users\Downloads\XBOX\JRunner_V0.5\JRunner_V0.5\output\nanddump4.bin
Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same
Reading Nand
Done!
in 1:01 min:sec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same