RGH + Dual Nand Xbox 360 (Jasper Motherboard + Phat) Help

X

xWeasel

Full Member
Jan 29, 2014
96
0
ok so as you can see in the title i want to rgh my 360 jasper phat and also dual nand it
but im not really sure what parts to get and which versions (e.g. j-r programmer, v1.1, v2)
i know i need a nand-x or j-r programmer, demon for the dual nand and a coolrunner
also, i need to know that if i get these parts will it work on my console?
thanks
 
X

xWeasel

Full Member
Jan 29, 2014
96
0
Game_Over said:
Check out the links in my sig. Do some research and you will find the information you are seeking.
Click to expand...
ok thanks
1 more question, im on dash 16547 so once ive done everything, shal i follow a tut to update rgh for 16547? or i dont need to?
 
X

xWeasel

Full Member
Jan 29, 2014
96
0
scott1503 said:
NAND x , jrp v1, jrp v1 with 1.1 upgrade and jrp v2 will all read and write and nand on either phat or slim consoles
Click to expand...
awesome! thanks for the answer! :)
also, are these items fine for dual-nand rgh (xbox 360 phat jasper):
j-r programmer, coolrunner II rev c development board, demon
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
You don't need the J-R programmer v2 if you're getting a DemoN.

Please be aware that what you're looking to do is not a noob installation. A card is shipped with the DemoN which I strongly advise you read before attempting installation.
 
X

xWeasel

Full Member
Jan 29, 2014
96
0
M

mrdrifta

VIP Member
Jan 31, 2011
325
0
New Zealand
This is getting painful.

You Need:

Demon Phat Dual Nand chip (Should be shipped with BB upgrade QSB- You will need this if your jasper has built-in 256mb or 512mb storage)
R-JTAG glitch Chip (You could try using a coolrunner chip or CR3 Lite but RGH2 is painfully slow and not worth the effort)


For the RJTAg kits to buy i would get the Ultimate Kit as you will want the JR-P v2 for POST MONITORING and using RATER, but if you feel the need to tune blind and save a few bucks, you could get the Starter Kit-Expect no help without full POST logs which you will need a JR-P v2 for.

I suggest familiarising yourself with the forums as this information will not be spoon fed to you for every question. Once you know how to use the forums, you will have 99% of the information you need, if not all of it.

Also, you should buy them from someone listed on this page: http://team-xecuter.com/where-to-buy/ otherwise you will not get any support from anyone here.
 
Last edited:
  • Like
Reactions: Taijigamer2
X

xWeasel

Full Member
Jan 29, 2014
96
0
mrdrifta said:
This is getting painful.

You Need:

Demon Phat Dual Nand chip (Should be shipped with BB upgrade QSB- You will need this if your jasper has built-in 256mb or 512mb storage)
R-JTAG glitch Chip (You could try using a coolrunner chip or CR3 Lite but RGH2 is painfully slow and not worth the effort)


For the RJTAg kits to buy i would get the Ultimate Kit as you will want the JR-P v2 for POST MONITORING and using RATER, but if you feel the need to tune blind and save a few bucks, you could get the Starter Kit-Expect no help without full POST logs which you will need a JR-P v2 for.

I suggest familiarising yourself with the forums as this information will not be spoon fed to you for every question. Once you know how to use the forums, you will have 99% of the information you need, if not all of it.

Also, you should buy them from someone listed on this page: http://team-xecuter.com/where-to-buy/ otherwise you will not get any support from anyone here.
Click to expand...
thanks for the help, but how do i find out if my jasper has built-in 256mb or 512mb storage? my 360 came with a 120gb hdd...
 
M

mrdrifta

VIP Member
Jan 31, 2011
325
0
New Zealand
Google is your friend. If you go to the settings menu and choose storage (without the clip-on harddrive connected) you should get a memory unit showing 214mb(or close to) for a 256mb unit or something like 429mb for a 512mb jasper
 
X

xWeasel

Full Member
Jan 29, 2014
96
0
mrdrifta said:
Google is your friend. If you go to the settings menu and choose storage (without the clip-on harddrive connected) you should get a memory unit showing 214mb(or close to) for a 256mb unit or something like 429mb for a 512mb jasper
Click to expand...
says no storage devices found...
 
M

mrdrifta

VIP Member
Jan 31, 2011
325
0
New Zealand
then you have a 16mb jasper and wont need the BB upgrage kit that comes with the Demon PHAT

You should only need:

Demon PHAT chip
RJTAG Ultimate Kit
 
You must log in or register to reply here.