Rgh green light flashing and no video

M13k2

VIP Member
Apr 14, 2011
157
0
IL,USA
I have solder all the point to the board and booted Xell a few times a few minutes ago and got the cpu key but have not created a image. but know there is no video and audio the coolrunner flashes green and the it powers on.

Falcon
Using J-runner
RGH
 

superspeed

VIP Member
Feb 2, 2012
825
0
TX, USA
I have solder all the point to the board and booted Xell a few times a few minutes ago and got the cpu key but have not created a image. but know there is no video and audio the coolrunner flashes green and the it powers on.

Falcon
Using J-runner
RGH
Wire-routing issue.
 

M13k2

VIP Member
Apr 14, 2011
157
0
IL,USA
know it has RROD 0022 and it doesn't get the rrod after 30 sec so i believe it a GPU problem
 
Last edited:

Justice1231

VIP Member
May 4, 2011
1,005
0
Adelaide, Australia (down south)
Have a look at this thread by Martin C. tells you all you need to know about the LDVs.

http://www.team-xecuter.com/forums/showthread.php?t=77634

However if its red ringing straight away i doubt that will help you, might be worth flashing back the stock nand, set the coorunner to programme and then see if the xbox boots to the normal dash, that way you can see if its a hardware fault.
 
Last edited:

Jimbobjoeyman

Full Member
Mar 27, 2010
82
0
ireland
If it takes a long time for the 0022 to turn up It can be a GPU issue.
0022 never turns up straight away unless the GPU is physically damaged.

It can also be damage to the area around the CPU_PLL_BYPASS.

pics please
 

M13k2

VIP Member
Apr 14, 2011
157
0
IL,USA
now the rrod doesn't show up at all but there is still no boot what should i do i using j-runner. I have read the nand got the cpu key also i forgot the dashboard i on how can i figure that out. Also i need help returning it to stock.