ANSWERED RGH hack green led blinking every 5 secs

[Justice1231]

Hi all, after my first attempt at the coolrunner mod was a washout, ive attempted again. I have a good look round but im a little confused so here we go.

My mobo is a jasper 16m (checked storage with no hdd on and xbox says no storage found)

This time all went well, soldered the points well (i think) followed RGH fibers glitch guide. Ive managed to get the xbox to glitch to the xell screen with no issues, however after i have reflashed my nand with nandflash.bin and xenon.elf from 360_Multi_Builder_v0.3\Data to a usb key the xbox says its image written now shut down. Ive shut down the xbox waited a few minutes and now when i try to reboot, the green led flashed approx every 5 secs but just a black screen, anyone any ideas, i dont want to rush out and buy things if its not needed i.e capacitors etc as my local shop isnt local if you know what i mean:tongue:

 

[Mickey3177]

Did you power cycle the MB by unpluging it for minute

 

[Justice1231]

Did you power cycle the MB by unpluging it for minute

No i didnt, i put in the usb stick the xbox did its thing and told me to shut down, which i did, i removed the usb stick waited around 2 mins then turned back on. get a black screen and nothing else. coolrunner has red power led on and the green led falshes ever 5 secs.

 

[Martin C]

What CB version do you have?

 

[Justice1231]

hi Martin, at the risk of sounding like a complete tool i dont know, it there an esay way to find out?

 

[Hackerjac]

get 360 dump tool and open your org nand dump in that program, it will tell you wath CB you have

 

[Justice1231]

What CB version do you have?

The CB version is 6750

 

[Justice1231]

anyone help plse?

 

[Xmods]

does xell reloaded boot with eject ?

 

[BL4K3Y]

does xell reloaded boot with eject ?

I don't think it does, but I only used the power button on my Falcon so I can't say for sure.

 

[Justice1231]

thank for getting back to me, ive just reflashed my nand with the image 0000000000.ecc and im now back at the xell screen, where to go from here?

 

[BL4K3Y]

You need to do some reading..... from this point, you need the CPU key and then you can move on to building your NAND image using ggBuild.

 

[Justice1231]

You need to do some reading..... from here, you need the CPU key and then you can move on to building your NAND image using ggBuild.

Ive already got the cpu key and have already built my image with ggbuild v.03, its when i build the image and try to restart the xbox it just gets a black screen with the coolrunner flashing every 5 secs,

 

[BL4K3Y]

Which tool did you use?

Give Rogero's 360 Multi Builder a shot.

 

[Justice1231]

Which tool did you use?

Give Rogero's 360 Multi Builder a shot.

Thanks blakey, i used rogeros v4 (used v3 last time)this time and it seems to have worked, booting to dash straight away.

 

[BL4K3Y]

i used rogeros v4 (used v3 last time)this time and it seems to have worked, booting to dash straight away.

Glad you got it sorted, I will close the thread for you .