RGH rgh help

[HeLL HAZARD13]

so i just got back my cool runner by TX and i just opened it and tryed to program it but it did not want to program :facepalm:?? any ideas what i can do ????

 

[Vinneh]

What are you using to program the coolrunner?

 

[talby71]

have you read this guide FiB3R's Glitch guide
it has a section on programming the coolrunner

 

[HeLL HAZARD13]

im useing jtag tool by cool shrimp and then i used coolrunner programer and it says failed

---------- Post added at 20:35 ---------- Previous post was at 20:34 ----------

have you read this guide FiB3R's Glitch guide
it has a section on programming the coolrunner

and i already read that thanks tho

 

[ezzda1]

are you sure you plugged the programer cable on the right way round?

 

[Vinneh]

Are you using a nand-x? If so make sure its properly plugged in.

 

[HeLL HAZARD13]

Are you using a nand-x? If so make sure its properly plugged in.

i did check if it was in the right way and every thing ..will it work on a mac cause i got anouther computer but its a mac does it matter?

---------- Post added at 20:47 ---------- Previous post was at 20:46 ----------

are you sure you plugged the programer cable on the right way round?

i am useing it and look what i said ^^

 

[Vinneh]

Did you install the nand-x drivers?

 

[Goldensavage]

I don't mean to be rude, but you have apparently done a RGH before. And also had numerous problems from passwords, to hard drives, to not knowing what flux is.

Can i suggest that if you want 360's done, you send them to a pro.

Other than that, what is different from the first RGH you did

 

[ochbay]

is the coolrunner light even on? a quick mistake i had on my first glitch was i plugged the nandx to coolrunner cable upside down on the coolrunner

 

[playingmax]

and is ur nandx updated to 3.0?