Hi guys, I have a dilemma. My buddy brought over his jasper rgh console for me to update the kernel, as I have done it with my jtag about 10 times without issue. He gave me the disc with nand, cpu key, kv info on it, but apparently it was a nand from another console and not his. I updated his console with the wrong info and now of course it won't boot. It does boot into Xell however and displays that the dvd key is incorrect... I can put an updflash.bin file on usb stick and update it...problem is I don;t have the correct nand for this console. I have the correct dvd key (from Xell), but no nand. If anyone can help me, I would greatly appreciated it. Thanks so much
FIXED RGH Jasper bad update will only boot to Xell
- Thread starter pcjoeyd
- Start date
Martin C
VIP Member
...and this is why you use the Xebuild update feature, folks.
You'll need to build a new nand using donor files. The process is in the J-Runner PDF.
Even if you're not using the xebuild update option, you should ALWAYS dump the NAND of the console and use THAT to build a new image. There could be changes made to files like KV or SMC Config which would be needed and not available on the original NAND.
You'll need to build a new nand using donor files. The process is in the J-Runner PDF.
Even if you're not using the xebuild update option, you should ALWAYS dump the NAND of the console and use THAT to build a new image. There could be changes made to files like KV or SMC Config which would be needed and not available on the original NAND.
