RGH/JTAG help

D

delimavi

Full Member
Apr 10, 2010
27
3
TX Product(s) used: Nand-x and Coolrunner (1st edition)
Console Type: Trinity
NAND size: 16?
Dashboard version: e.g 2.0.16537
CB version: 9231
Screenshot of NAND details from J-Runner: see atachment
J-Runner log:
===================================================
friday 13 december 2013 17:04:28

J-Runner v0.3 Beta (4) Started


Version: 03
Flash Config: 0x00000000
Can not Continue

===================================================
friday 13 december 2013 17:14:51

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files

===================================================
friday 13 december 2013 17:16:41

J-Runner v0.3 Beta (4) Started



Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\Administrator\Downloads\output\nanddump1.bin
Reading Nand
Done!
in 2:13 min:sec

Reading Nand to C:\Users\Administrator\Downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Reading Nand
Trinity
RGH2 Selected
Nand Initialization Finished
Done!
in 2:21 min:sec

Comparing...
Nands are the same
Programming Coolrunner
C:\Users\Administrator\Downloads\common\xsvf\trinity.xsvf
Version: 03
Flashing C:\Users\Administrator\Downloads\common\xsvf\trinity.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 2B50
Done!

ECC created
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:10 min:sec

Comparing...
Nands are the same
Programming Coolrunner
C:\Users\Administrator\Downloads\common\xsvf\trinity.xsvf
Version: 03
Flashing C:\Users\Administrator\Downloads\common\xsvf\trinity.xsvf to CoolRunner
Input Filesize: 593E
Output Filesize: 2B50
Done!

ECC created
Version: 03
Flash Config: 0x00000000
Can not Continue
Version: 03
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:10 min:sec


===================================================
friday 13 december 2013 21:33:00

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Header is wrong..
Trinity
RGH2 Selected
Nand Initialization Finished
Comparing...
Nands are the same
Header is wrong..
Invalid Image
Failed to create ecc image
Version: 03
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9188
Trinity
Reading Nand to C:\Users\Administrator\Downloads\output\nanddump1.bin
Reading Nand
Done!
in 2:09 min:sec

Initializing nanddump1.bin..
Reading Nand to C:\Users\Administrator\Downloads\output\nanddump2.bin
Header is wrong..
Trinity
Reading Nand
Nand Initialization Finished
Done!
in 2:09 min:sec

Comparing...
Nands are the same
Header is wrong..
Invalid Image
Failed to create ecc image
Comparing...
Nands are the same
Header is wrong..
Invalid Image
Failed to create ecc image
Header is wrong..
Invalid Image
Failed to create ecc image
Version: 03
Flash Config: 0x00000000
Can not Continue
Header is wrong..
Invalid Image
Failed to create ecc image

===================================================
friday 13 december 2013 21:53:38

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Header is wrong..
Trinity
RGH2 Selected
Nand Initialization Finished
Version: 03
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9188
Trinity
Reading Nand to C:\Users\Administrator\Downloads\output\nanddump1.bin
Reading Nand
Done!
in 2:09 min:sec

Reading Nand to C:\Users\Administrator\Downloads\output\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Trinity
Nand Initialization Finished
Reading Nand
Done!
in 2:09 min:sec

Comparing...
Nands are the same
Comparing...
Nands are the same
Header is wrong..
Invalid Image
Failed to create ecc image
Initializing nanddump1.bin..
Header is wrong..
Trinity
Nand Initialization Finished
Comparing...
Nands are the same
Header is wrong..
Invalid Image
Failed to create ecc image
Header is wrong..
Invalid Image
Failed to create ecc image

updflash.bin log (if applicable):
Image of Coolrunner: ?
Images of close-up soldering to motherboard: see atachment

Description of problem:
I have install on my slim trinity coolrunner (1st version) and read the nand. When I am try to create ECC I got the following message:

Trinity
RGH2 Selected
Nand Initialization Finished
Header is wrong..
Invalid Image
Failed to create ecc image

I think I have overwrite the orginal Nand because I got this message. I have program the coolrunner with the Jrunner and When I am trying to boot the xbox360 I got no display on my screen and the coolrunner does not flash (glitch) green.
I have read different solutions with DGX and RGX files, but I do not have that hardware like DGX or RGX. And I do not have cpu and dvd key. So I can not use that files or is there a specialy method/solution for my situation?

I hope somebodey can give me tips.

Was the console working before you started: Y
2.jpg1.jpg
 
Last edited:
D

delimavi

Full Member
Apr 10, 2010
27
3
Re: can't create ECC Trinity (coolrunner)

sorry Scot1503 I am a noob.
what do you mean with correct rgh template?
 
scott1503

scott1503

VIP Member
Jul 21, 2012
1,794
88
Harrogate, North Yorkshire , uk
  • Like
Reactions: delimavi
D

delimavi

Full Member
Apr 10, 2010
27
3
Re: can't create ECC Trinity (coolrunner)

I hope the information I filled is enough and good
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Yes, you overwrote the original images. Unfortunately this happens due to people not reading & understanding before starting an RGH. There was never a need to re-dump your NAND after you had a good copy.

The console is still salvageable. Keep the dumps you have safe for now. Your console still has the ECC on there. If you're not getting a debug light (green) on the coolrunner, check B, C and D solder wires.
 
  • Like
Reactions: delimavi
D

delimavi

Full Member
Apr 10, 2010
27
3
I am gonna check the solderpoints b,c and d but do not see strange points. Maby I must re-solder some points if they don't make good contact.
Is it possible now to boot (glitch) because I cannot create ECC if I load the 2 nands and If I follow tutorial I must do more before boot and see the cpu key.

I programmed the coolrunner you can see in the log, thats enough to read the cpu key?
Can you tell me the steps what I must do now? the coolrunner is on mode slim and nor
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
get a dgx/slim proto, there are alot of fake coolrunners out there. also try the cpu_rst cleaner, or leave it on until it boots xell, some times it takes forever, with an older model coolrunner.
 
jordyne

jordyne

BANNED
Dec 3, 2013
174
0
take blue wire wrap around xclamps/ have u tryd switching 2 phat on the coolrunner
 
Last edited:
jordyne

jordyne

BANNED
Dec 3, 2013
174
0
its just been a lot of people on here with fake chips wanting help we don't support it when u ask 4 a better pic or a pic they say they got it working
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
I have bought official rev C's from VGCRepairs before they closed that had black switches, so just because the switch is white or black doesnt mean anything, A big tell is if you get the chip, and the coolrunner man is not on the chip on the board itself, those are obviously fake, and you would be surprised how many people ask for help with fake products here.
 
You must log in or register to reply here.