RGH RGH not booting

[XL3THAL VIP3RX]

right,ive had this glitch box a couple of month now,everything working fine.
over past week fans have started getting louder,so ive removed heat sinks and put new thermal paste on the GPU n CPU.ive put it all back together and now it wont boot.the centre green light comes on boot the cool runner dosnt attempt to flash green.
it dosnt get the red ring and the fans are just making a pulsing noise.
any help would be great...cheers

 

[manwithoutname]

Most probably moved or bridged one of the CoolRunner soldered connections on the board. Did you recheck all the points?

 

[XL3THAL VIP3RX]

i had a look and they all seem to be in place.there all taped down too.if it was owt to do with the GPU would the board still flash and glitch as normal??

 

[manwithoutname]

The console obviously won't glitch with a faulty GPU but you can still read & write the NAND. I would suggest switching off the CoolRunner by turning the switch to the PRG position then flash your original NAND and see if the console will boot to normal dash!

 

[XL3THAL VIP3RX]

flashed stock nand back,booted back up and the dreaded 3 lights was awaiting me :mad2:
thats 2 elites i hav now that need reflowing:facepalm:

cheers for ya help mate

 

[manwithoutname]

Sorry to hear that, all though what did you get for the secondary code? Good luck with the next one.

 

[XL3THAL VIP3RX]

how do u get secondry error code??never had to do it before?

just putting the cool runner in a spare box ive got as we speak.hhope this lasts longer

 

[manwithoutname]

When you get the RROD, hold the sync button and press the eject button 4 times. With each press you will get number of lights flashing on the ROL:

4 = 0
3 = 3
2 = 2
1 = 1

 

[XL3THAL VIP3RX]

all went well with new glitch box...worked first time